Xiaomi KingMi Manual

KingMi Smart Power Strip (3 USB ports 2A Quick Charge)
Sensor Power
button
USB ports
Overview
Thank you for using this unit. This power strip has
USB ports 2A Quick Charge connectors, supports
remote control has protection against voltage
overload and protective plates to prevent the
possibility of electric shock.
Standard connectors
Three-level security
Two level security
Specifications
Title: KingMi Power Strip (3 USB ports 2A Quick
Charge);
Model: QMCXB01ZN;
Standard: Q / DXQMK 0001-2015; IEEE 802.11 b /
g / n;
CMIIT ID: 2016DP1397;
Wireless Frequency: 2.4G;
Housing material: flame-resistant polycarbonate;
Size: length 241 x width 42 x height 26 (mm);
Device Length: total length of 1.8 m;
Weight: 330g;
Technical parameters: 2500W MAX, 10A MAX,
250V;
Input voltage USB module: 100-240V, 50 / 60Hz,
0.5A;
The output voltage of the module USB: 5V, 2.1A;
The total output voltage of a single USB Module:
15W;
Operating temperature: -10 ° C + 40 ° C.
- Use your phone and other portable devices for remote control via connecting to the
Internet.
- When electric current exceeds a threshold value, the device is automatically
disconnected from a power supply, preventing overload of the device;
- After turning off unnecessary devices, that caused an overload, reset the unit, using the
touch power button or mobile app. Come to use the device after replacing the fuse.
- When determining current leakage, device can automatically disconnect from a power
3
supply. At the same time you get a warning message in app.
- Power strip equipped with double and triple protection systems that are independent of
each other.
- Use fire-resistant material that meets state standards.
- 5 standard connectors, each of which can be used equally for standard sockets with
three flat plugs, plugs and two German standard sockets with two round plugs (4.8 mm).
- Use the touch buttons for easier and convenient device control.
Connect your device to power, ensure availability of sustainable signal Wi-Fi. When
indicator blinks yellow, sign in «Mi Smart Home» APP and follow instructions of KingMi
Smart Power Strip.
Blue permanent indicator, indicates successfully saving settings. Getting remote control of
device.
Install the app
Find Mi Smart Home app at Google
play or scan the QR-Code.
Install and run the application and
follow the instructions.
This device is already included in Mi
Smart Home list of devices.
Features
Settings