Starting Your Washer - Whirlpool LA77OOXP Use & Care Manual

Starting your washer
Before starting
m 1. Measure and add detergent
your washer:
2. Place sorted load in washer.
I / 3. Start washer.
Select a Select WATER
1. LOAD SIZE
2.
TEMPERATURES
l
Turn the knob to point at a setting
that describes the size of load you
want to wash.
l
Set the knob anywhere on or
between EX SMALL (a few items]
and LARGE (a full load].
DO NOT LOAD
ABOVE CLOTHES GUARD
NOTE: Use the LARGE water level
for best permanent press results.
l
Select wash and rinse water tem-
peratures by pushing a button.
l
This drawing shows a warm wash
(top temperature] and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your "Laundry Guide."
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
0
DO NOT
OVERLOAD WASHER.
(17.3 gals./655 L)'
*Approximate
(14.7 gals./557 L)'
fill with load.
(12.1 galsJ45.8 L)'
(9.5 gaW36.0 L)'
4