Advertisement
Quick Links
King Edward Fitting Instructions
Step 1
LAY YOUR FRAME
This is an example of a decking frame
Using the decking joists provided in the Kit (100x50 mm) timber please proceed to build
the frame. Using the 4" x 10g screws to secure the timbers.
METHOD FOR SCREWING
ANGLE SCREW
Please make sure the frame fits the requirements for your chosen kit.
Don't forget to check your work with a level as you go!
All images are for illustration only, Please see individual item listings for actual item specifications
www.eDecks.co.uk
FRAME TO BE LAID ONTO
PAVING SLABS, OR ONTO
GRASS OR SOIL
This may require
some cutting to fit your size
requirements
STRAIGHT FASTENING
Page 1 of 7
Advertisement
Summary of Contents for eDecks King Edward
- Page 1 King Edward Fitting Instructions Step 1 FRAME TO BE LAID ONTO LAY YOUR FRAME PAVING SLABS, OR ONTO This is an example of a decking frame GRASS OR SOIL This may require some cutting to fit your size requirements Using the decking joists provided in the Kit (100x50 mm) timber please proceed to build the frame.
- Page 2 King Edward Fitting Instructions Step 2 FITTING THE PERGOLA POSTS You are supplied with 2 4M pergola posts. Accounting for the post sitting flush with the bottom of the base please select how hight you would like the pergola posts, please cut accordingly.
- Page 3 King Edward Fitting Instructions Step 3 INSTALL DECKING BOARDS Decking boards should fit exactly to the frame, working in the opposite direction to the joist work Cutting will be required around the Posts Deck boards 2x fixings per joist Don’t forget to check your work with a level as you go! Page 3 of 7 All images are for illustration only, Please see individual item listings for actual item specifications...
- Page 4 King Edward Fitting Instructions Step 4 INSTALL SUPPORT RAFTERS First secure the 2 supporting rafters to the posts. Secure Don’t forget to check your work with a level as you go! Page 4 of 7 All images are for illustration only, Please see individual item listings for actual item specifications...
- Page 5 King Edward Fitting Instructions Step 5 INSTALL RAFTERS Space the remainder of the rafters across the top of the support rafters Using the Pergola Clips provided with your kit to secure Don’t forget to check your work with a level as you go! Page 5 of 7 All images are for illustration only, Please see individual item listings for actual item specifications...
- Page 6 King Edward Fitting Instructions Step 6 HANDRAIL SYSTEM Pre-Building the spindles and handrails is the next step. Accurately measure between pergola posts cut hand and base rails accordingly, there should be a 125mm gap between each spindle 125 mm Gap...
- Page 7 King Edward Fitting Instructions Step 7 FINISH! This is an example of the finished pergola. Once this is complete - Sit back and enjoy! Page 7 of 7 All images are for illustration only, Please see individual item listings for actual item specifications...
Need help?
Do you have a question about the King Edward and is the answer not in the manual?
Questions and answers