Starting Your Washer - Whirlpool LA6800XM Use And Care Manual

Starting your washer
Before starting your washer:
w 1. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD SIZE
Select WATER
2.
TEMPERATURES
l
To change the setting on the LOAD
SIZE SELECTOR, turn the knob to RESET.
l
Then turn the knob to point at a
setting that describes the size of the
load you want to wash.
l
Set the knob on or be-
tween HAND WASHABLE (a few small
items] and EX LARGE [a full load).
See your "Laundry Guide" for details
on load sizes.
l
Select wash and rinse water tem-
peratures by pushing a button.
l
This drawing shows a warm wash
(top temperature) and cold rinse
[bottom temperature) selection.
Recommended wash temperatures
can be found in your "Laundry Guide"
and printed under the washer lid.
LOAD SIZES AND WATER LEVELS
Use less than a full tub of water For best cleaning results, the
when you have less than a full load
load must be able to move freely
to wash.
in the water. Too big a load or too
little water can tear items.
EX-LARGE (20.5 gals./77.6 L)'
MEDIUM (13.9 gals 152.6 L)'
!
I
I
HAND WASHABLE (7.8 gals./29.5 L)'
L&J
,
:
:
'Approximate fill with load.
4