Summary of Contents for Adjustable Comfort Posture+
Page 1
User Manual Posture+ Adjustable Base For customer service call: 1-877-707-7533...
Page 2
IMPORTANT INFORMATION PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT. PROPER OPERATION OF YOUR ADJUSTABLE BED IS NECESSARY TO ENSURE THE LONG LIFE AND DURABILITY YOU EXPECT FROM A HIGH-QUALITY PRODUCT. 1. Electrical Safety Please ensure you connect the base properly to the power supply. Any incorrect power connection may cause electric shock or fire. FOR OPTIMAL SAFETY, YOUR ADJUSTABLE BED SHOULD BE PLUGGED INTO A SURGE PROTECTOR (not supplied with this adjustable bed).
Contents Unpacking and Assembling Your Base: ......................4 Attaching the Legs to the Base: ........................4 Inserting the Mattress Retention Bar: ......................5 Using the Remote Control: ........................... 6 Synching Two Twin XL Bases: ........................7 Troubleshooting: ............................8 Warnings: ..............................9 Warranty: ..............................
Unpacking and Assembling Your Base: 1. Open the carton box. Layout the bed frame other as shown below. 2. Open all the leg boxes and cut the zip ties. Please note: Number of part boxes may vary depending on the manufacturer. Attaching the Legs to the Base: 1.
Inserting the Mattress Retention Bar: 1. Flip over the base taking extra care not to damage the legs. It is recommended that because of the weight of the base that two people flip it over to prevent any injury. 2. Insert the mattress bar as shown: Please note: The mattress retention rail is not to be used to lift the base.
Using the Remote Control: Using the Remote Control is easy; each button is clearly labeled to operate up and down elevations, massage, and timer. Programming the Remote Control: Sync Remote Control with the Base: • To sync the remote with the base, simultaneously hold the Red button on the Control Box and any button on the remote Control (except for TV/PC, LOUNGE, FLAT, ZERO G) for 5 seconds to turn it on.
Synching Two Twin XL Bases: 1. Press + Hold the red button on the Bed A Control Box for 3 seconds. When the red indicator light comes on, press any button on the remote control. If Base A responds, continue to the next step. If Base A does not respond, repeat this step. 2.
Troubleshooting: 1. No Power: Ensure that the electrical outlet has power. Check each cable to make sure that they are properly connected and the electrical plug of the base is securely inserted into the power outlet. 2. No Power: If there is power to the base but the base does not move and both the Remote-Control LED Power Indicator Light and the Power Supply LED Power Indicator lights are on, unplug and re-plug in base and resync the remote control to the base (see Programming the Remote Control).
Warnings: To reduce the risk of burns, fire, electric shock, or injury to persons: • Unplug the base from the outlet before adding or removing accessories. • Close supervision is necessary when this base is used by, or near children, pets or persons that may need assistance •...
Warranty: 3-YEAR LIMITED WARRANTY INFORMATION This warranty applies to new Classic Brands Adjustable Comfort Posture+ Adjustable Base and is extended only to the consumer who makes the original purchase. This warranty is not transferrable. The "adjustable base" does not include the mattress.
Need help?
Do you have a question about the Posture+ and is the answer not in the manual?
Questions and answers