Kistler KCD14539 Mounting

Accessories
Laptop Car Mounting
Mounting Kit for Standard Laptops
For secure installation of a laptop in the vehicle; to be placed
on the co-driver's side.
• Adapts to usual laptop sizes (max. width 370 mm) and fits
into almost all vehicles
• Solid lightweight aluminum structure, powder coated
• Easy to mount
• Quick fasteners to adjust conveniently
• Secures laptop and screen
Description
The Laptop Car Mounting includes a base, a stand, a swivelling
arm, and a table top that can securely hold all types of laptops
that are not exceeding 370 mm width. The adjustable laptop
position provides optimal viewing angle.
A retaining element to lock the Laptop on the mounting en-
sures best possible safety. Rubber dampers absorb damaging
shock and vibration helping to prevent them from transferring
to your laptop. The laptop's power supply can be stored safely
underneath the laptop.
Application
For mobile vehicle testing with Kistler sensors and TurboLab
Pro.
Mounting
In the footwell area of the co-driver's side according to the
description on the following pages. It is recommended to dis-
arm the airbag on the co-driver's side. No co-driver permitted!
This information corresponds to the current state of knowledge. Kistler reserves
the right to make technical changes. Liability for consequential damage resulting
from the use of Kistler products is excluded.
Ordering Code
• Laptop car mounting
Included Accessories
• Display support
• Laptop hold-down devices
• Supporting rod
©2011 ... 2012, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland
Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com
Kistler is a registered trademark of Kistler Holding AG.
Typ KCD14539
Type
KCD14539
included
included
included
Page 1/4