Table of Contents
Advertisement
Starting your washer
Betore starting
your washer:
1. Measure
and add detergent.
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD SIZE
Select CYCLE and
WATER TEMPERATURE;
2. Start the washer
l
Turn the knob to point at a setting
that describes
the size of load you
want to wash.
l
Set the knob anywhere
on or
between
small (a few items) and
large (a full load].
NOTE: Use the LARGE water
level
for best permanent
press results.
LOAD SIZES AND
WATER LEVELS
For best cleaning
results, the
load must be able to move freely
in the water. Too big a load or too
little water
can
cause
wear
or
tearing
of load items.
CAUTION:
DO NOT
OVERLOAD WASHER.
(17.2 ;%%I
L)'
SMALL
(9.5 gals./36.0
L)'
*Approximate
fill with load.
A.
Push In the Control
Knob and
turn It to the right. It must be
pushed
in and turned only
clockwise.
B.
To select wash water temperature,
stop on the area in the selected
cycle
marked
H (hot], W (warm)
or C (cold].
Match the wash water tem-
perature
to the type of fabrics
and soils being washed.
Recommended
wash tem-
peratures
can be found in your
"Laundry
Guide!'
All rinses are cold. Cold rinses
save energy
and help prevent
wrinkles
from setting into fabrics.
4
Advertisement
Table of Contents
