Blend-N-Go ® Cup Accessory (Select Models Only); Using Your Blend-N-Go - Oster Versa BLSTVB-103 User Manual

Blend-N-Go Cup Accessory (Select Models Only)
®
A
B
A. Spill proof lid
B. 20-oz. dishwasher-safe, BPA-free Tritan
C. Sealing ring for tight seal to threaded cup
D. Blade
E. Threaded cap
F. Blender base
BLSTVB-103_104_13ESM1.indd 16-17
C
D
E
F
TM cup
16

Using Your Blend-N-Go

With Your OSTER
®
Blender
Before washing ensure the blender is off and unplugged. Wash all components
except blender base with soapy water with a soft sponge and a bottle brush. Do
not use abrasive cleansers or sponges for cleaning. Rinse well and dry. Parts are
also dishwasher safe. Do not blend hot liquids.
Place desired ingredients into cup according to the following order:
Liquids, fresh ingredients, frozen fruit, ice, yogurt and ice cream.
(Cut all firm fruits, vegetables and other foods into pieces no larger than 1/2-inch
(1.25 cm) by 2 inches (5.0 cm).
• Place sealing ring over cup opening. (See Figure 1)
• Place blade into cup. (See Figure 2)
• Place threaded cap onto cup. Turn clockwise to tighten. (See Figure 3)
• Place cup assembly onto Blender base. (See Figure 4)
• Hold cup in position. Operate Blender according to the instructions in your
Blender User Manual. Blend until desired consistency.
• Remove threaded cap, blade and sealing ring.
• Place lid on cup and turn clockwise to tighten. (See Figure 6)
You're now ready to enjoy your blended drink!
Figure 1 Figure 2 Figure 3
Figure 4 Figure 6
Figure 5
Versa
® ®
17
12/13/13 9:18 AM