Power Supply Installation - Sharp WH-T36E Service Manual

3. WATER PIPE
1. Turn the joints between body unit, the WATER VOLUME KNOB and SHOWER HOSE manually.
Never use other tools to avoid breaking plastic parts.
2. When driving screws, use power less than 40 kgf.cm.
3. Piping installation (as illustration).
Shower hose
Length of water inlet hose at least 15 cm.
1. Be sure to cut off the main power supply switch every time before starting any electrical work.
Use insulated double wire gage size at least 4 square millimeters. (Model WH-T36E, WH-T39EP)
and size 6 square millimeters (Model WH-T46E) for power supply line.
Connecting supply line from the main distribution control unit to the cut off breaker.
(This breaker should be installed outside the bathroom and connected permanently).
Shower
Filter

POWER SUPPLY INSTALLATION

Bathroom
Fig. 14
Main breaker
Fig. 15
8
Water inlet
Filter
Water volume
O-ring
Valve