Whirlpool 3396314 Use And Care Manual page 27

Removing accumulated lint from
tha dryer
Lint can gather insida the dryer and be a
fuel for fire. Lint should be removed every 2
to 3 years, or more often, depending on
dryer usage. Cleaning should be done by a
qualified person. lf you have any questions
or comments, please call our Consumer
Assistance Center at l-800-253-1 301.
Electrkd Shock, Personal InJury,
and Product Damage Hazard
m Unplug the power supply cord or turn
off the elect&al power before
removing dryer panels.
@Make sure the dryer is cool.
a Dryer parts can have sharp edges.
Usa care whan handling.
* More than one person is required to
Iii, tit& or move machine because of
its weight and size.
aTruck unly from mar.
Failure to follow the above instn&.ions
could result in electrical shock, per-
.sonal injury, or product damage.
1. tJnplugthepowarsuppiycxxlortumoff
the elactrical power.
2. Remove back panel. See Installation
hx&Jctions.
3. Remove lint from shaded area in ilbstra-
tbn with a soft brush or vacuum cleaner.
Avoid damaging wires, themats,
funnei I(w), or igw @a
4. Replace penel; reconnect and level dryer
again, if necasaary.
Hestinletl
Thermoetata Motor
duct
Electric dryer with back
panel removed
27