Operation; Maintenance - Dimplex CDFI-BX1000 Service Manual

Operation

The heater can be controlled by remote, or the tethered
controller through the Opti-myst Cassette. Please refer to
cassette User's Guide for details.
! NOTE: The Opti-myst Pro Box Heater cannot be operated
independently from the Opti-myst Cassette (no heat only
mode).
Resetting the Temperature Cutoff Switch
Should the heater overheat, an automatic switch will turn the
heater off and it will not come back on without being reset. The
temperature cutoff switch can be reset by disconnecting power
to the unit, waiting 5 minutes and reconnecting power to the
unit.
CAUTION: If you need to continuously reset the heater,
disconnect power to the unit and call Glen Dimplex Americas
at 1-888-346-7539 for technical support. Please have your
model and serial number ready when calling.

Maintenance

Opti-myst Pro Box Heater Surface Cleaning
To remove fingerprints or other marks, the exterior finish can be
cleaned with a damp cloth with a mild detergent. The surface
should be completely dried with a lint free cloth to prevent water
spots.
Servicing
Except for installation and cleaning described in this manual,
an authorized service representative should perform any other
servicing.
! NOTE: The heater should not be operated with an
accumulation of dust or dirt on or in the unit, as this can cause
a build up of heat and eventual damage. For this reason
the heater must be inspected regularly, depending upon
conditions and at least at yearly intervals.
3