Page 1
Service Manual Model UL Part Number CDFI-BX1000 6909910100 CDFI-BX1500 6910370100 IMPORTANT SAFETY INFORMATION: Always read this manual first before attempting to service this fireplace. For your safety, always comply with all warnings and safety instructions contained in this manual to prevent personal injury or property damage.
NOTE: Procedures and techniques that are considered important enough to emphasize. CAUTION: Procedures and techniques which, if not carefully followed, will result in damage to the equipment. WARNING: Procedures and techniques which, if not carefully followed, will expose the user to the risk of fire, serious injury, or death. www.dimplex.com...
CAUTION: If you need to continuously reset the heater, conditions and at least at yearly intervals. disconnect power to the unit and call Glen Dimplex Americas at 1-888-346-7539 for technical support. Please have your model and serial number ready when calling.
6. Unscrew the four screws that secure the board to the standoffs. (Figure 2) NOTE: On the CDFI-BX1000 with no MOD des- ignation, these will instead be snap-in standoffs. The snap-in standoffs will need to be cut, and the new board will need to be installed using self- adhesive standoffs.
12. Reassemble the unit in the reverse order as above. as the screws in the back (CDFI-BX1000 has 8 screws in total, and the CDFI-BX1500 has 12 screws in total). (Figure 3)