Table of Contents
Advertisement
Quick Links
SHOW PRO INDUSTRIES
P.O. Box 1235, Springtown, TX 76082 / (817)523-4055 / (817)220-5117 fax
Show Pro Industries would like to thank you for purchasing a Pro Cutter.
Every effort has been taken to provide you with a quality product designed to
provide years of trouble-free service.
Pro Cutter 009
Packing List:
control box (steel box containing electronic components)
antenna *
remote control (worn on rider's wrist)
off-side pulley
(4) heavy duty cable ties for mounting control box
installation instructions
Cow Model:
FLEX cow **
slide tube set w/snaps
kevlar cable (custom cut) & "tech" line
Flag Model:
flat braid rope (400')
trainer flag
* Do not discard protective cap. Re-use cap to protect antenna connector when antenna is
not installed.
** A black & white banner can be added that will interchange with cow.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Show Pro Industries Pro Cutter 009
- Page 1 SHOW PRO INDUSTRIES P.O. Box 1235, Springtown, TX 76082 / (817)523-4055 / (817)220-5117 fax Show Pro Industries would like to thank you for purchasing a Pro Cutter. Every effort has been taken to provide you with a quality product designed to provide years of trouble-free service.
-
Page 2: Installation Instructions
INSTALLATION INSTRUCTIONS: Cow Model: Mount control box: Securely attach control box on one side of arena. It should be mounted so pulley on bottom of box is approximately 45 inches from the ground. Mount return pulley: Mount off-side return pulley on opposite side of arena in horizontal position. -
Page 3: Additional Features
* Superior radio system: Better range, less interference. * Large drive system: Heavy-duty industrial components * Weather-tight NEMA enclosure * Climate control system *Dynamic braking Thank you for choosing.... SHOW PRO INDUSTRIES P.O. Box 1235, Springtown, TX 76082 / (817)523-4055 / (817)220-5117 fax email: showpro@flash.net / www.procutter.com... - Page 6 INSTALLATION INSTRUCTIONS: Flag Model: Mount control box: Securely attach control box on one side of arena. It should be mounted so pulleys on bottom of box are approximately 45 inches from ground. Mount return pulley: Mount off-side return pulley on opposite side of arena in horizontal position.
- Page 7 FRONT VIEW - PC009 Fasten rope to ends of flag FLAG GROUND OVERHEAD VIEW - PC009...
-
Page 8: Front View
Pro Cutter Flag models with optional Cable Tensioner FRONT VIEW Cable Tensioner Fasten rope to ends of flag GROUND TOP VIEW Pro Cutter Cable Tensioner... - Page 9 8.00 46 INCHES 10.50 45 INCHES...
-
Page 10: Troubleshooting
Important Safeguards: Electrical enclosure (control box) should be protected with a non-metal roof or shield. This not only protects the paint finish but also keeps rubber components (gasket, boots, antenna, etc.) from drying out. Warning: Electric shock or malfunction could occur if power cord or plug is damaged in any way. -
Page 11: Limited Warranty
(2) years from the date of original purchase. During the warranty period, Show Pro Industries will repair, or at its option replace without charge, any SPI product (excluding normal wear items), providing it is returned to the factory, shipping prepaid, and is proven to be defective during the subsequent factory inspection.
Need help?
Do you have a question about the Pro Cutter 009 and is the answer not in the manual?
Questions and answers