Page 1
Keep these instructions for future reference as they contain important information. • For use with the Vidster™ • Requires 4 AA Alkaline batteries (not included). Age: 8+ FCC STATEMENT: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Package Contents ......1 The following is included with every Mattel Vidster™: 1 Handheld Vidster™...
Page 3
(if designed to be rechargable). Battery Installation/Replacement • Charge rechargeable batteries only under adult supervision The Vidster™ uses 4 AA Alkaline batteries to (if designed to be rechargable). power it. Make sure the unit is off. Locate the •...
To install your Grip or Tripod: Right. (1) Locate the threaded Right. insert on the bottom of the Vidster™. (2) Align and insert the threads on the grip (included) or a Tri-pod (optional) with the camera insert. (3) Tighten the thumb- screw finger tight...
Imager Installing SD Memory Card (Optional) Installing Microphone (Optional) Your Vidster™ comes complete with 32MB of memory for saving The Vidster™ system has its own Microphone pictures or video. If you want more memory, you’ll need to add an SD or...
Here’s a list of what the buttons on the Control Pad do: Taking a Picture To take a picture using the Vidster™: 1. Switch the camera ON. 2. Set the Mode switch to PICTURE. A camera icon will appear on the screen.
6. Press the Center button to stop recording when you’re done. volume in increments of 1; there are 7 volume levels total. When you are recording a video the red LED light on the front of Vidster‘ Camera Playback will come on.
Whether playing a scene back from the archive or showing your friends slideshow and return to the Camera Playback menu. what you’re doing in real time, you can hook your Vidster™ to most TV. 1. With both your Vidster™ and your TV in Video Camera Playback the off position.
2. Set the slide switch to Playback mode and turn on your Vidster™. • Expandable memory via SD/MMC card Your Vidster™ cannot be used as a camera or a video camera while • Composite Video Out it’s attached to your computer. The Vidster™ will show up as a •...
Page 10
Keep the camera level and steady; even when you’re shooting a video, Always turn off your Vidster™ after each use. Remove batteries for move slowly and steadily. extended storage. Your Vidster™ screen will say “Goodbye” when powering down. Your Vidster™ will go to sleep automatically after approximately 2 minutes of no operation.
Page 11
636 GIRARD AVENUE NINETY-DAYS LIMITED WARRANTY EAST AURORA, NY 14052 Mattel, Inc. warrants to the original consumer purchaser that this product will be free of Valid only in U.S.A. defects in material and workmanship for ninety (90) days (unless specified in alternate warranties) from the date of purchase.
Need help?
Do you have a question about the Vidster and is the answer not in the manual?
Questions and answers