Advertisement
Figure 4: Power Block moved - tie-wrap locations
Once the tie-wraps have been cut and removed, the power cable can then be removed
from the shelf by threading the cable through the slot to the right of location U8.
The cable is held in place by locking edges on the connector and the mating connector
housing. This mechanism is used to securely hold the cable to the motherboard – see
Figure 5 below.
Zhone Technologies, Inc. @Zhone Way, 7001 Oakport St., Oakland, CA 94621 (510) 777-7000 Fax: (510) 777-7001
Advertisement
