Download Print this page
Plantin 517659 Assembly Instructions Manual

Plantin 517659 Assembly Instructions Manual

Greenhouse shed 6'x8'

Advertisement

Quick Links

ASSEMBLY INSTRUCTIONS
GREENHOUSE SHED 6'x8'
ITEM: 517659
Kibbutz Lotem
P.M Carmiel 20124
Israel
0
IMPORTANT
You must read these instructions carefully before you start to assemble this greenhouse.
Please carry out the steps in the order set out in these instructions.
Keep these instructions in a safe place for future reference.
(Internal Dimensions)
VER09_05
Overall Dimensions (approx.)
97.5" L • 76" W • 76" H
247.4 L • 193 W • 193 H cms
SAFETY ADVICE
We strongly recommend the use of work gloves during assembly as aluminium profiles may have sharp edges.
Do not attempt to assemble the greenhouse in windy or wet conditions.
Take special care not to touch overhead power cables with the aluminium profiles.
Always wear shoes and safety goggles when working with extruded aluminium.
Dispose of all plastic bags safely - keep them out of reach of small children.
The greenhouse must be positioned and fixed on a flat level surface.
Do not lean against or push the greenhouse during construction.
Keep children away from the assembly area - the aluminium profiles may have sharp edges.
Do not position your greenhouse in an area exposed to excessive wind.
Do not attempt to assemble this greenhouse if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells.
If using a step ladder ensure that you follow the manufacturers safety advice.
If using power tools always follow the manufacturers instructions.
Hot items such as recently used grills, blowtorches etc. must not be stored in the greenhouse.
Ensure there are no hidden pipes or cables in the ground before inserting the ground stakes.
GENERAL ADVICE
This is a multi-part assembly.
Selecting a site - choose a sunny level position for your greenhouse away from overhanging trees.
Area needed - 266.6cm/104.5" Length x 211.9cm/83".
It is advisable to use a lubricant to ease connection between aluminium profiles and panels.
The component parts should be checked and laid out in an orderly way, close at hand.
Keep all small parts (screws etc.) in a bowl so they do not get lost.
Note that the door is hinged on the right hand side and therefore opens to the right.
Keep roof clear of snow and leaves.
Please keep the tracking number appears on the box.
Please refer to this number when calling the service office for questions
and complains.
CARE & MAINTENANCE
TOOLS & EQUIPMENT REQUIRED
When your greenhouse needs a clean, use a mild detergent solution and rinse with cold clean water.
DO NOT use acetone, abrasive cleaners or other special detergents to clean the clear panels.
When opening the greenhouse door do not pull the handle fiercely.
For general support and replacement part please contact in:
*UK Replacement parts - contact UK Customer services helpline: 0121 506 0008
Fax: 0121 422 0808 Email: alanuk@keter.co.il
*Canada 1-800-661-6721.
TOOLS & EQUIPMENT REQUIRED
Crosshead screwdriver
Silicone Sealant & Applicator
Step ladder
Tape measure
Spirit level
Work gloves
Rubber mallet
Large hammer for ancors
If help is required seek professional advice within store.
Wrench 10
Lubricant
See over for contents

Advertisement

loading
Need help?

Need help?

Do you have a question about the 517659 and is the answer not in the manual?

Questions and answers

Summary of Contents for Plantin 517659

  • Page 1 Dispose of all plastic bags safely - keep them out of reach of small children. The greenhouse must be positioned and fixed on a flat level surface. ITEM: 517659 VER09_05 Do not lean against or push the greenhouse during construction.
  • Page 2 CONTENTS CONTENTS ITEM QTY. ITEM QTY. ITEM QTY. ITEM QTY. 570mm 22.4” PP1C 650mm 25.5” 590mm 23.2” 1390mm 54.7” 665mm 26.1” 1035mm 40.7” 1400mm 55.1” 596mm 23.4” PP1G 1020mm 40.1” 4 1400mm 55.1” 4 335mm 13.1” 1R A14N M10A 335mm 13.1” 1L 1390mm 54.7”...
  • Page 3 1400 PP1C 1400 PP1C 1400 PP1C 1400 PP1C PP1C...
  • Page 4 1190 1190 1190 PP1G 1190 1400 1190 PP1G...
  • Page 5 A14N 1190 1390 A14N 1390 PP1G 1190 A14N 1390 (1,2) (6,7) PP1G...
  • Page 6 A14N 1390 PP1G PP1G PP1G PP1G PP1G PP1G M10A PP1G PP1G PP1G PP1G M10A PP1G A14N PP1G PP8C A14N 1390 1390 M10A A14N PP8C...
  • Page 7 PP1G PP1G PP8C PP1G PP1G PP1G PP8C PP8C PP1G PP8C 1290 PP1C 1290 10cm...
  • Page 8 1290 10cm PP1C PP1C PP1C PP1C M31N PP1C M31N M31N...
  • Page 9 1400 1400...
  • Page 10 PP1C PP1C 1400 1400...
  • Page 11 M31O 1035...
  • Page 12 1035 PP1G PP1G...
  • Page 13 1390 1390...
  • Page 14 PP8G PP8G M10A 1035 1035...
  • Page 15 1400 1190 1400 10cm 10cm...
  • Page 16 1190 PP1G 1190 1400 PP1G PP1G...
  • Page 17 1020 1195 1195 1195 1020 1020 20cm PP1G...
  • Page 18 1035 1035 1195 PP1C PP1G...
  • Page 19 1190 1190 1190 M10D M10D 30cm 1190 M10D 1190 INSIDE INSIDE...
  • Page 20 klick!!
  • Page 21 1035 PP1C 1035 PP8G...
  • Page 22 1195 1035 1195 M10D 1035 M10D PP1C 1035 1195 PP1C...
  • Page 23 INSIDE INSIDE...
  • Page 24 M10A M10A 1290 PP8C M10A PP8C 1290 1290...
  • Page 25 1400 1400...
  • Page 26 1020 1020...
  • Page 27 1020 1020 1010 1020...
  • Page 29 M10A 1290...
  • Page 30 C55R (a.b) (a.b) (a.b) C55L C55L (a.b) C55R...
  • Page 31 1195 C55T C55T...