Compatible Models - Samsung SWA-8500S User Manual

7. If the SWA-8500S does not connect, take the necessary steps
according to the LED Indicator's status
LINK (Blue)
STANDBY (Red)
Others

Compatible Models

• Compatible with select Samsung Soundbar. Please visit the Soundbar product page at
www.samsung.com/support for more information.
• Compatible model list is subject to change without further notice.
LED status
Connected with
On
the Soundbar
Connection
Blinking
standby status
On Connection failure
- Errors
ENG - 10
Action
-
Check if the Soundbar is turned on
Repeat steps 3 through 6.
Check if the Soundbar is turned on
1. Press the ID SET button on the back
of the Wireless Receiver Module with
a pen tip for 5~6 seconds until the
LINK LED indicator blinks (in Blue).
5 Sec
L R
ID SET
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
ID SET
2. Repeat steps 3 through 6.
Contact a Samsung Service Centre.
POWER