Download Print this page
Pro-Elec PEL00294 Instructions

Pro-Elec PEL00294 Instructions

9” desk fan

Advertisement

Quick Links

Please read these instructions carefully before use and retain for future
reference.
IMPORTANT SAFETY INFORMATION
When using electrical appliances basic safety precautions should always be
followed.
Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the use of
the appliance in a safe way and understands the hazards involved.
Children shall not play with this appliance.
Cleaning and maintenance shall not be made by children without supervision.
There are no user-serviceable parts in this product. Refer servicing to qualified
personnel.
Do not operate this fan with a damaged plug or cord, after a malfunction or after
being dropped or damaged in any way.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Ensure that the fan is switched off before removing the guard.
Do not insert anything through the grille when the fan is in use.
Make sure that the fan is on a stable surface when operating.
9" Desk Fan
Model: PEL00294 and PEL00462

Advertisement

loading

Summary of Contents for Pro-Elec PEL00294

  • Page 1 9” Desk Fan Model: PEL00294 and PEL00462 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • When using electrical appliances basic safety precautions should always be followed. • Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply.
  • Page 2 ASSEMBLY • Unscrew the retaining ring from the motor shaft and remove the rear guard retaining nut. • Fit the rear guard to the body of the fan lining up the two pegs with the slots in the rear guard. •...

This manual is also suitable for:

Pel0046234727303472728