Table of Contents
Advertisement
TIME DISPLAY
The TIME Display
shows the total
amount
of wash agitation
time se-
lected.
When the first fill begins, the
display
changes
to "AU:' indicating
automatic
operation.
l
Any time during
wash agitation
the MORE TIME or LESS TIME pad
can be touched.
The display
will show the number
of minutes
left in wash agitation.
l
During the final spin the dis-
play changes
to show the
number
of minutes let? until the
cycle
is finished and the load
can be removed.
Restarting
the Washer
The washer
is designed
to "re-
member"
where it was in the cycle
when HOLD/RESTART is touched.
It
will not remember
if there is a power
interruption,
such as a blown fuse.
it power
is lost at beginning
of wash cycle:
1. Touch POWER "ON:'
2. Touch FABRIC Selection
and Options
The washer will finish filling (if needed),
and wash according
to the new
selections.
If power
is lost with water
remaining
in the washer:
I. Touch POWER "ON:'
2. Touch SPIN to drain and spin the
load.
3. After the washer stops, touch POWER
"ON" again.
4. Touch FABRIC Selection
and Options.
The washer will wash according
to the
new selections.
if memory
Is lost at beginning
of rinse
cycle.
1. Touch POWER "ON:'
2. Touch RINSE SPIN to finish filling and/
or the rinsing cycle.
Changing
the Amount
of Wash Time
When a FABRIC Selection
is touched,
the amount
of wash agitation
time will
appear
in the TIME Display. The wash
agitation
time which appears
is the
recommended
time for that cycle
(for
normally
soiled items). IF MORE TIME
or LESS TIME is desired,
touch the ap-
propriate
TIMED WASH pad before the
end of the first fill.
See pages
10 and 11 for minimum,
recommended
and maximum
wash
times.
7
Advertisement
Table of Contents
