The length and width of the upper bunk mattress and foundation are as follows :
Length
74"- 75"
You must use only this size mattress.
Ensure thickness of mattress and foundation combined does not exceed 9 M > "
and that the mattress is at least 5" below upper edge of guardrails.
This Bunk Bed uses a slat kit for mattress foundation.
( 1 )
Follow the information on the warnings appearing on the upper bunk end structure
and on the carton. Do not remove warning label from bed.
( 2 ) Always use the recommended size mattress, mattress support, or both,
to help prevent the likehood of entrapment or falls.
( 3 ) Surface of mattress must be at least 5 in. (127mm) below the upper edge of guardrails.
( 4 )
Do not allow children under 6 years of age to use the upper bunk.
( 5 )
Periodically check and ensure that the guardrail, ladder, and other component are
in their proper position, free from damage, and that all connectors are tight.
( 6 )
Do not allow horseplay on, or under the bed, and prohibit jumping on the bed.
( 7 )
Do not use substitute parts. Contact the manufacturer for replacement parts.
( 8 )
Use of a night light may provide added safety precaution for a child using the upper bunk.
( 9 ) The use of water or sleep flotation mattress is prohibited.
(10)
Prohibit more than one person on upper bunk.
(11)
STRANGULATION HAZARD : Never attach or hang items to any part of the Bunk Bed
that are not designed for use with the bed, including, but not limited to: hooks, belts
and jump ropes.
(12)
Keep these instructions for future reference.
BUNK SAFETY WARNING
Size of Mattress and Foundation
W idth
37 1 / 2"- 38 1 / 2"
Replacement Parts
SAFETY WARNINGS
Thickness
9 / " m ax
Page 1 of 11
N
Need help?
Do you have a question about the HBEE3908 and is the answer not in the manual?
Questions and answers
Hi I don't have the tool parts to build the bunk bed that I got in gift. It's Harriet Bee wooden bunk bed full on full. Can you please send just the tools set which would has screws and rest of all tool parts to build bunk bed
The Harriet Bee HBEE3908 wooden bunk bed includes spare hardware in case any parts are damaged during assembly. The required tools for assembly are a Phillips head screwdriver and an Allen wrench. If additional replacement parts are needed, refer to the manual’s replacement parts section or contact the manufacturer.
This answer is automatically generated
@Mr. Anderson Thanks a lot for responding. Can you please provide the contact of Manufacturer either an email or phone no. in US
Can i change the ladder to the left side SKU: W100283578
Yes, the staircase can be set up at either end of the bunk bed, so the ladder can be changed to the left side.
This answer is automatically generated