Summary of Contents for SenSource 6300 Series
- Page 1 6300-Series Remote Display SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013...
-
Page 2: Table Of Contents
Features ....................................4 Components ..................................... 4 Getting Started ..................................4 Caution ..................................... 4 HARDWARE OVERVIEW ................................5 6300 Series Hardware ................................5 Specifications ................................... 6 Installation ....................................7 Remote Control ................................... 8 Remote Push Button Default Settings ............................. 8 Quick Start Display Settings ..............................9 Clock ...................................... - Page 3 Options Chime ..................................23 Options-Display ..................................23 Options-Events ..................................23 Options Definitions (continued) ..............................24 Options-Inputs ..................................24 Trouble Shooting ..................................27 Mounting Template ................................... 28 LIMITED WARRANTY .................................. 29 SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013...
-
Page 4: Introduction
V E R V I E W The 6300 series remote display is an intelligent LED display with infrared capabilities. It is a versatile timer, clock, counter and more. The display has two inputs for buttons or logic controls and a communications link to talk to other displays. -
Page 5: Hardware Overview
6300-Series Remote Display HARDWARE OVERVIEW 63 00 S E R I E S A R D W A R E SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 6: Specifications
6300-Series Remote Display P E C I F I C A T I O N S SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 7: Installation
6300-Series Remote Display N S T A L L A T I O N SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 8: Remote Control
ON T R OL E M O T E U S H U T T O N E F A U L T E T T I N G S SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 9: Quick Start Display Settings
6300-Series Remote Display U I C K T A R T I S P L A Y E T T I N G S SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 10: Clock
As time: [MENU] "230" [ENTER] As date: [MENU] "232" [ENTER] (only when master also showing date) Set time units displayed STU seconds: [MENU] "411" [ENTER]. LTU hours: [MENU] "423" [ENTER]. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 11: Count Up/Down Timer
Press [Menu] 14 [Enter]. Type in the desired chime time. You may optionally specify a specific day to chime on, or leave it blank to chime every day. Press [ENTER] to accept changes. Chime 2 Press [Menu] 15 [Enter]. Follow the same steps as for chime 1. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 12: Timer Display Format
Set interval unit displayed Press [MENU] "24x" [ENTER], where 'x' is the interval unit selected. Set time units displayed STU seconds: [MENU] "411" [ENTER]. LTU hours: [MENU] "423" [ENTER]. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 13: Counter Detailed Instructions
P T I O N S See the "Slave Displays" section for more information about multiple displays. Set slave mode: [MENU] "213" [ENTER]. Set display format As count: [MENU] "233" [ENTER]. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 14: Takt Time Detailed Instructions
During a power outage the current TAKT number will be preserved. The TAKT timer will not continue running, with the exception that it will complete the current TAKT interval. Thus the TAKT time will only be behind if a TAKT interval occurs while the unit is off. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 15: Takt Options
The 6300 Series displays allow multiple displays to work together. The primary display is referred to as the "master" display. Other displays controlled by the master are referred to as "slave" displays. All of the operating modes for the 6300 Series support slave displays. -
Page 16: Slave Setup And Options
4.1. Smallest Time Unit Displayed (STU) (for 2.3.0 or 2.3.1) 4.2. Largest Time Unit Displayed (LTU) (for 2.3.0 or 2.3.1) 4.3. Leading Zero Suppression 4.4. Colon Flash Rate 6.7. Remote Lockout SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 17: Setting The Programmable Options
Section 1.6 is a special “Quick Set section.” It is actually not a memory area at all but a function that sets all other memory areas to a factory “default” condition. For instance if you want to set all memory areas to what SenSource considers normal for a wall clock, type [Menu] "210"... -
Page 18: Options Table Summary
6300-Series Remote Display P TI O N S A BLE U M M A RY Options in bold are the default settings. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 19: Options Table Summary (Continued)
6300-Series Remote Display P TI O N S A BLE U M M A RY C O NT INU E D SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 20: Options Definitions
(if enabled). Prompt Time format (2.3.0) HH:MM:SS [ENTER], DDDD [ENTER] Interval format (2.3.1) NNNNNN [ENTER] HH=hours, MM=minutes, SS=seconds, DDDD=days N=quantity of the set interval unit SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... - Page 21 Sets up a TAKT timer such that every 15 seconds the display will increment by 1 unit. Press the [DOWN] button to start the timer. 1.6.9 Reset Onboard Clock The internal RTC can be reset. Resets the date and time. Note: This will probably impact the current display's operation. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013...
-
Page 22: Options Definitions (Continued)
2.3.3 As count Show the current unit count Applies to: 2.1.3, 2.1.4, 2.1.5 Note: Slave displays will only show the date if the master is also showing the date SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 23: Options Chime
Time rollover point occurs when the LTU (4.2) time unit overß ows Interval rollover point Days: 65535 Hours, Minutes, Seconds, Hseconds: 999999 5.1.0 Stop Displays the last valid time or interval before the rollover SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 24: Options Definitions (Continued)
6.1 Input 1 Action Determines what action occurs when Input 1 is activated. 6.1.1 Stop Stops Timer 6.1.2 Start Starts Timer 6.1.3 Start/Stop Alternate starts and stops timer 6.1.4 Reset Resets timer SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... - Page 25 Do not exceed 5.5V. 6.4 N.O./N.C. Defines the default state of the inputs: normally open or closed. 6.4.0 Normally open Contact: doorbell. Voltage: 0V. 6.4.1 Normally closed Contact: N.C. relay. Voltage: V.5 SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013...
- Page 26 Sets whether the display ignores or responds to the remote. Toggle IR lockout on/off by pressing and holding [EXIT] on the remote for 5 seconds. The display will indicate the change by showing "ir0" or "ir1," where "0" = locked and "1" = normal. SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226...
-
Page 27: Trouble Shooting
6300-Series Remote Display R OU B LE H O O TIN G SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 28: Mounting Template
6300-Series Remote Display OU N TI NG E M P L A TE SenSource, Inc. • Youngstown, OH U.S.A. www.sensourceinc.com • 800.239.1226 Rev. 5/24/2013... -
Page 29: Limited Warranty
(under normal use) for one year from date of shipment from SenSource, Inc. or its authorized reseller. SenSource, Inc.'s sole obligation under this express warranty shall be (at SenSource, Inc.'s option and expense) to replace the product or part with a comparable product or part, repair the product or part, or —...
Need help?
Do you have a question about the 6300 Series and is the answer not in the manual?
Questions and answers