Summary of Contents for FRCAMI R89
- Page 1 FRCAMI R89 Wifi Camera User Manual Support: serviceforcam@163.com （Note: Please charge the camera for 5-6 hours before use）...
- Page 2 Thanks for choosing our 2020 Upgraded small wireless camera. With large capacity battery, this camcorder can not only use as spy camera but also a car camcorder. If you have any problems or suggestion, please do not hesitate to contact us on Amazon or email at serviceforcam@163.com.
- Page 3 Button Description: 1. FHD 4K Len 2. Infrared Night LEDs 3. ON/OFF 4. Video / Reset(Long press for 6 seconds) 5. Photo / Turn off Indicator Lights(Long press for 6 seconds) 6. Micro SD Card Port 7. USB Charge Port 8.
- Page 4 blue lights will flash in Wifi mode and press the button again then the camera will be in Non-Wifi mode and the blue light will be always on. 5. Photo: Turn on the camera, press the Wifi ON/OFF button to standby condition that the blue light will be always on, then press once the Photo button and the camera will take a picture(Please insert a Micro SD card).
- Page 5 6. Motion Detection: You can enable this function in APP Sancam. When a moving object is detected, the camera will take a picture and push alerts to your phone. 7. Loop Recording: When the SD card is full, it will auto overwrite the oldest files and save new recordings.
- Page 6 3. Connect the camera’s Wifi hotspot via your phone: Tap the WLAN settings on your phone, search for this camera’s Wifi hotspot (named with the UID sticked at the back of camera), then click it to match your phone. Please refer to the below pics.
- Page 7 4. Set Local Connection (Point-to-Point live streaming mode): 4.1 Open the “Sancam” APP, it will automatically search the camera and then tap Confirm to connect it and make it online. If it doesn’t automatically add the camera, please tap the “ + ” icon in APP Sancam for manual adding.
- Page 8 4.2 Click LAN search device to find the camera then tap （Add）to enter next step. Please refer to the below picture. 4.3 Or you can add the device manually by entering the device ID and default password 8888(you can change the password in app setting).
- Page 9 Tips: Under the local connection, the camera's WIFI hotspot is valid within 10 meters. When your phone is out of the range, it will disconnect and you will not be able to watch the live view. 5. Set Remote Connection: Tap the Setting icon >>>Tap “Network configuration”...
- Page 10 6. Motion Detection Open the “Sancam” app on your phone>>> Tap “Setting” icon>>> Tap “Motion detection set” to set up and choose the sensitivity of the motion detection. Please refer to the below pics to set up this function. You can also set alarm information.
- Page 12 Motion detection interval alarm is 5-60 seconds, you can set the interval alarm time by yourself. After turning on the Motion Detection function, you can also set to Push notification, Upload FTP after alarm. After triggering the motion detection alarm, it will automatically take 1-3 pictures if you have inserted a SD card in camera when motion detects.
- Page 13 7. Micro SD card setting In this setting, if you have inserted a SD card in the camera, you will find the capacity of the card. If the card you use is NEW, please remember to format it before use. Besides, you can also set the camera Stop recording(the card won’t save any recording files), or you can set Full time recording, Alarm recording and Short video.
- Page 14 Short Video: Time-lapse shooting. 8. Infrared settings You can set Manual startup or Start timing on your own. By setting the startup time and shutdown time, the camera will auto to turn on and off the night vision function according to the system time.
- Page 15 9. Other Config In this setting, you can set Time Config, Power frequency, Initialization Setting, FTP Config, Email Config and User Config.
- Page 16 9.1 Time Config You can set the camera time in this function. 9.2 Power Frequency You can choose 50Hz or 60Hz in this setting. 9.3 Initialization Setting You can restart or reset the camera in this setting. We recommend you reset the camera by pressing the Reset button on the camera.
- Page 17 9.4 FTP Config 9.5 Email Config By setting the email config, you can receive notification in Motion detection setting>>>Push alert.
- Page 18 9.6 User Config You can change password in the setting(default password is 8888). 10. APP icons instructions: Please refer to the below picture. You can adjust Brightness, Image Contrast and Resolution, turn on/off Night Vision, Indicator Lights, Audio. You can also quickly take a photo and video.
- Page 19 11. Muti-use requirement In the setting, you can edit the device name for different cameras, set the password, and then share it with QR code to your family and friends. If you have too many places needed to be monitored, you can install several cameras(Max 4 cameras) at different places at the same time in one app.
- Page 20 If you have other family or friends who need to get access to the cameras and watch the live recordings, you can share it with your family. 12. Playback and download files from memory card： Tap the home page“ ”icon and select the videos you need to watch or download.
- Page 21 Ⅳ. Note 1. This camera only supports 2.4GHz network. It does not support 5GHz network. 2. Please insert a Micro SD card (NOT include) to save recordings before use. 3. If the memory card is brand new, please FORMAT it before using. 4.
- Page 22 6. The camera is default to Wifi mode. Even without Wifi or any network, the camera can still work. With network, you can see live videos. With SD card in, the camera can save the recordings so that you can playback and never miss any seconds.
- Page 23 Other problems and solutions: 1. Router account or password is wrong, please enter the right account or password. 2. The router has not been rebooted for too long to allocate IP address. 3. Stay close to the router within 3-5 meters to set remote connection. 4.
- Page 24 Ⅶ. Warnings 1. Applicable Occasion：Please strictly abide by relevant national laws and regulations. 2. Do not use the product illegally, otherwise the consequences are at your own expense. Ⅷ. Warranty 1. Camera comes with 12-month Warranty and 30 days money back. 2.
Need help?
Do you have a question about the R89 and is the answer not in the manual?
Questions and answers