Raising The Handle; Preparation - febromed get up Instruction Manual

The swiveling hold system for radiology
Table of Contents

Advertisement

9.3.2 Raising the Handle

1.
Grab the handle with one hand.
2.
Lightly pull down the triangle handle to
tighten the strap.
3.
Push and hold the belt buckle with the other
hand.
The belt buckle is now unfastened.
4.
Reduce the fraction on the triangle handle
until the handle is lifted to the desired
position.
5.
Release the button on the belt buckle.
The belt buckle snaps audibly.
6.
Make sure that the handle has been raised
as desired.
2
4
3
1
Abb.5: Raising the Triangle Handle
12
5
F-049 GB Rev00 02.05.2019

10 Preparation

The get up® must be disinfected for cleaning.
The following warnings must be observed:
ATTENTION
Loss of Efficacy Due to Inappropriate Aids
Poorly absorbent aids lead to insufficient
disinfection.
Only use absorbent material,
e.g. fleece.
ATTENTION
Environmental Damage Due to Disinfectants
If surface disinfectants find their way into soils
and waters, the environment can be put at risk.
Always dispose of surface disinfectants
without polluting surface waters or the
sewer system.
Follow the disposal instructions of the
disinfectant manufacturer.
WARNING
Chemical Burn on Hair or Skin
If surface disinfectant finds its way to unpro-
tected hair or skin, chemical burns can occur.
Always wear protective gloves when in
contact with surface disinfectant; Protective
gloves made of nitrile or butyl rubber are
particularly suitable.
If brought into contact with hair or skin:
Immediately wash the surface disinfectant
off the skin and hair using tap water of
drinking quality.
WARNING
Serious Eye Damage
get up® Instruction Manual

Advertisement

Table of Contents
loading

Table of Contents