Download Print this page

Gemini GSX-L2515BTB Manual page 6

Portable bluetooth speaker

Advertisement

Available languages

Available languages

GSX-L2515BTB
6
PORTABLE BLUETOOTH SPEAKER
INTRODUCTION
Thank you for purchasing our GSX-L2515BTB. We are confident that the Gemini
platform of products will not only make your life easier through the use of the
latest technological advancements in cross-platform connectivity and sound
reproduction but will raise the bar for DJ and pro audio products. With the proper
care & maintenance, your unit will likely provide years of reliable, uninterrupted
service. All Gemini products are backed by a 1-year limited warranty*.
PREPARING FOR FIRST USE
Please ensure that you find these accessories included with the GSX-L2515BTB:
(1) Power Cord
(1) Operating Instructions
(1) Warranty Card
PRECAUTIONS
1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the unit. There are NO USER
REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified Gemini Sound
Products service technician. Do not attempt to return this equipment to your
dealer.
3. Do not expose this unit to direct sunlight or to a heat source such as a radiator
or stove.
4. This unit should be cleaned only with a damp cloth. Avoid solvents or other
cleaning detergents.
5. When moving this equipment, it should be placed in its original carton and
packaging. This will reduce the risk of damage during transit.
6. DO NOT EXPOSE THIS UNIT TO WATER OR HEAT.
7. DO NOT USE CLEANING PRODUCTS OR LUBRICANTS ON THE CONTROLS OR
SWITCHES.
CONNECTIONS
PLEASE NOTE IT IS VERY IMPORTANT THAT YOUR AMPLIFIER HAS MATCHED
POWER RATINGS! (Make sure your equipment is completely OFF and also lower
ALL VOLUME, LEVEL, & GAIN controls before connecting the speaker.)
Responsible Party Name:
Innovative Concepts & Designs
Company address:
458 Florida Grove Road
Perth Amboy, NJ, 08861 USA
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2( This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the
FCC Rules. These equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined
by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.
2AE6G-2515BTB
FCC ID:

Advertisement

loading