TBI PRO Engineering TBI Bark V7 Pro Manual

Dual Vibration Bark Control Collar Manual
-This product is designed for no-pain correction with enhanced vibration and tone technology, which
helps to stop barking for small & medium dogs with NO SHOCK.
-This product is Vibration Bark Control Collar, the prongs cannot deliver shock.
-This product is NOT intended for use on dogs under 6 months old and less than 8 pounds.
-NOT for use with aggressive dogs. Use the product under supervision.
-For the comfort of your pet, please wear the Prong Covers to the prong before use.
-Avoid leaving the product on dog for more than 12 hours per day. Never connect a leash to the collar.
-Check the contact area daily for signs of rash or a sore. If a rash or sore is found, STOP using the
product immediately until the skin heals.
-Wash the dog's neck area and the prong covers and prongs weekly with a damp cloth.
-The product senses the dog's high-frequency barking and other dog's barking may have a very small
chance to activate the product. Decrease the sensitivity level when other dog's nearby.
Description for Power Indicator
Blink in green,device is charging
Solid in green,device is fully charged
Solid in red,device is charged with improper charger
Notes: improper charger means chargers with output voltage over 5V.
Press the power button
to get to Test Mode,
make sure the digit
shows 0 before test.
Vibration Mode
Put the product on your dog.
Sensor
Microphone
Bark,bark!