Operating Instructions; Starting Your Washer - Whirlpool LA56OOXS Use & Care Manual

Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a sorted load in the washer before starting it.
1
. Select a
LOAD SIZE
2
Select
n
WATER TEMPERATURES
l
Turn the knob to point at a setting
that describes the size of the load
you want to wash.
l
Set the knob on or between EX
SMALL (a few items] and LARGE
(a full load).
l
Select wash and rinse water tem-
peratures.
l
This drawing shows a warm wash
(top temperature] and cold rinse
[bottom temperature] selection.
Recommended wash temperatures
can be found in your "Laundry Guide:'
NOTE: Use the LARGE wafer level
for besf permanent press rewlfs.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
n
CAUTION:
DO NOT
OVERLOAD WASHER.
*Approximate
fill with load.
(17.3 gal./655 L)'
(14.7 gaU55.7 L)*
(12.1 gaU45.8 L)*
(9.5 gaU36.0 L]*