Download Print this page

Safe & sound SA8092 Instructions page 2

Infrared talking thermometer

Advertisement

Specification
Temperature Measurement Range:
Body Mode 32.0°C – 42.9°C (89.6°F – 109.2°F)
Accuracy ± 0.3°C (32.0°C – 42.9°C)
± 0.5°F (89.6°F – 109.2°F)
Surface Mode 0°C – 60.0°C (32.0°F – 140°F)
Accuracy ± 1°C (0°C – 60°C)
± 2°F (32°F – 140°F)
Room Mode 0°C – 40.0°C (32.0°F – 104°F)
Accuracy ± 0.5°C (0°C – 40°C)
± 0.9°F (32°F – 104°F)
Operating ambient:
Body and Surface mode
Temperature: 10°C - 40°C (50°F – 104°F)
Humidity: ≤85% RH
Room mode
Temperature: 0°C - 40°C (32°F – 104°F)
Humidity: ≤85% RH
Storage and transport condition
Temperature: -20°C - 55°C (-4°F – 131°F)
Humidity: ≤93% RH
Display resolution temperature range: 0.1°C (0.1°F)
Display: Tricolour colour coded display; green: normal
temperature, orange: low fever, red: high fever.
Temperature readings in °C and °F
Display memory: Last 32 readings.
Power consumption: ≤300mW
Battery life: Over 4000 times with 2 x AAA batteries
Dimension: 158mm x 45mm x 35mm
Net weight: 65g
Calibration: If used privately, no calibration is required.
For professional use, it is recommended to check
calibration once a year.
PLEASE RETAIN THE INFORMATION ON THIS PACK FOR FUTURE REFERENCE
Made In: PRC. Produced for: Paul Murray Plc, Wide Lane, Southampton, SO18 2FA, UK. www.murrayshealthandbeauty.com
REVISION 2 April 2018
Explanation of symbols:
These symbols mean that you must not throw away the product
and batteries in household waste. Dispose of the product and
batteries at your local waste disposal centre for correct
treatment and recycling.
Cleaning & Storage
Store the thermometer in the bag provided in a
cool dry place away from dust and avoid
sunlight and direct heat sources.
To clean; use an alcohol swab or cotton swab
with alcohol (70% Isopropyl), ensure no liquid
enters the interior of the item. Never use
abrasive cleaning agents or thinners to clean.
Never immerse the thermometer into water or
other cleaning liquids. Take care not to scratch
the surface of the probe lens or display.
Replacing the Batteries
The LCD will indicate the battery symbol when
the batteries require replacement. Replace both
the batteries to ensure the thermometer works
accurately.
Unclip the battery cover and remove old
batteries. The replacement batteries should be
of the same type (1.5V AAA) and must be
installed according to the correct polarity.
Replace the battery cover.
Remove batteries if the unit is not being used
for a long period of time to prevent them from
Type BF equipment.
leaking. Do not throw away used batteries in
household waste. Dispose of batteries at your
local waste disposal centre in the appropriate
battery dispose site.
WARNINGS
Thoroughly inspect all parts before the first use
and before each subsequent use to ensure that
there are no defects, signs of wear or foreign
particles. Discard immediately if signs of wear,
damage or defect are noted.
Keep away from children when not in use as
small parts could present a choking hazard.
Use only under adult supervision.
Do not use near strong electromagnetic fields, i.e.
keep away from radio systems or mobile phones.
Only use this item in accordance with supplied
instructions and in accordance with any advice
from your doctor or other healthcare professional.
WEE / AF0043SY / PRO
This indicates the lot number –
The product is in
note that the first four digits of
compliance with
the lot number is also the year
93/42/EEC 0120.
and month of manufacture.

Advertisement

loading