tecnotest STARGAS 898 LIGHT Operating Instructions Manual page 43

______________________________________________________________________________ STARGAS
5.0 - MAINTENANCE
5.1 - Printer paper change
Open the printer front panel (11) and go ahead with the replacement only when the
tool is on.
•
Remove the exhausted roll.
•
Fit the new roller edge (40) into the printing mechanism moth, after opening the
mechanism the paper is fed automatically.
•
Introduce the paper roll in its housing and close the panel.
The printer writes on thermal paper. The spare rollers can be ordered directly at our
resellers. The use of original paper is recommended.
5.2 - Filter cleaning
The filter allows to work in dusty places without having operating problems over time.
A periodical cleaning with water and soap is suggested. In case the filter is still dirty
after cleaning, replace it.
To dismount the filter:
•
Remove the filter support (14) on the back of the tool containing he filter (42).
•
Clean or replace the filter as needed.
•
Replace the filter inside the filter holder and then fit the assembly inside the
housing by pressing it by the hand.
OPERATING INSTRUCTIONS 39