Table of Contents
Advertisement
Available languages
Available languages
•
Put the shaft's head vertically into the ingredients before pressing
one of the switches. This will prevent splashing when the motor is
switched on.
•
Switch on motor by choosing "Speed I" (10) or "Speed II" (11) and
blend but remember to use for no longer than 1 minute of
continuous motor use. The motor must then be rested for 10
minutes.
Note: we recommend starting with the lower speed setting ("I") and
then increase the blade rotation speed by selecting speed "II" if
needed.
Tips:
•
Never fill the mixing cup to more than 2/3 full, to prevent over
flowing.
•
Always blend ingredients together with water or other liquid with the
stick blender.
•
Do not use the stick blender to blend dry, hard foods only, such as
coffee beans, ice cubes, sugar, cereals, chocolate etc.
•
Always use the appliance on a secure, dry level surface.
HOW TO USE WITH THE CHOPPER BOWL
•
Make sure the motor block is disconnected from the power outlet.
•
Place the chopping blade on the center pin inside the chopper
bowl (4). – handle with caution because it is sharp!
•
Place the chopper bowl on an anti-slip pad.
•
Add food in chopper bowl, such as meat, cheese, onions, herbs,
garlic, bread crumbs or crackers, etc.
•
Put the chopper lid (5) on the chopper bowl (4), by inserting the
grooves on the side of the lid into the pins inside the wall of the bowl
and locking it with a twisting motion clockwise.
•
Place the motor block (9) onto the chopper's lid and lock it in place
by applying a gentle twisting motion clockwise.
•
Plug the appliance into a wall outlet.
•
Pulse on any switch, "Speed 1" (10) or "Speed II" (11) to operate the
chopper. During the processing, hold the motor unit with one hand
and the chopper bowl with the other.
•
After use, unplug it and take the motor unit off of the chopper
cover (with a counter clockwise twisting motion); then remove the
www.KALORIK.com
7
CMM 39732 - 200528
Advertisement
Table of Contents
