Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Scubatech TECLINE Comfort Harness
- Page 1 Comfort Harness Assembly Version 1.1, February 1, 2014...
-
Page 2: Disclaimer
Disclaimer This document is proprietary to Scubatech Sp. z o. o. ("Scubatech") and no ownership rights are hereby transferred. No part of this document shall be used, reproduced, translated, converted, adapted, stored in a retrieval system, communicated or transmitted by any means, for any commercial purpose, including without limitation, sale, resale, licence, rental or lease, without the prior express written consent of Scubatech. -
Page 3: Table Of Contents
Comfort Harness - Assembly Table of Contents Disclaimer ..........................2 Scope of Delivery ........................4 Assembly ..........................4 Step 1 - Installing the Shoulder Belt ..................4 Step 2 - Installing the Right Shoulder Pad ................4 Step 3 - Installing the Right Pull Ring ................... 5 Step 4 - Installing the Pull Belt .................... -
Page 4: Scope Of Delivery
Comfort Harness - Assembly Scope of Delivery The Tecline comfort harness is delivered as a complete set, ready for assembly: Parts of the comfort harness Unlike a standard harness, the comfort harness consists of 3 main belts + crotch strap. -
Page 5: Step 3 - Installing The Right Pull Ring
Comfort Harness - Assembly • Flip the right part of the shoulder belt forward, and lead it through the second flap in the shoulder pad. • Below the Tecline logo, there are 3 more flaps in the shoulder pad. Lead the right part of the shoulder belt through the first flap. -
Page 6: Step 4 - Installing The Pull Belt
Comfort Harness - Assembly • Finally, hide the belt end under the flap with the Tecline logo. Step 4 - Installing the Pull Belt • Turn the belt, so the seam faces downwards. • Lead the end of the pull belt upwards through the pull ring, over the cross strut. - Page 7 Comfort Harness - Assembly • Then, lead the belt end downwards through the moving part of the pull ring. • Install the two rubber pieces to support a backup lamp. • Lead the belt end through the inner backplate slot at the bottom. •...
-
Page 8: Step 5 - Installing The Left Shoulder Pad
Comfort Harness - Assembly Step 5 - Installing the Left Shoulder Pad • Mount the shoulder pad on the left shoulder belt, as described in step 2. • Lead the belt through the second flap, and install the inflator bungee. •... -
Page 9: Step 6 - Installing The Crotch Strap
Comfort Harness - Assembly Step 6 - Installing the Crotch Strap • Install the remaining rubber piece on the belt. • Lead the belt end upwards through the horizontal slot at the bottom of the backplate (from back to front). •...
Need help?
Do you have a question about the TECLINE Comfort Harness and is the answer not in the manual?
Questions and answers