Advertisement
Advertisement
Summary of Contents for SENS8 Light Cam
-
Page 2: Table Of Contents
Table of Contents 01 What’s in the box 02 Before you get started 03 How to set up 04 How to install 09 Status introduction 11 Limited warranty 13 Safety... -
Page 3: What's In The Box
What’s in the box SENS8 Light Cam Base 800-lumen motion-sensing light Light Sensor Indicator Light 1080p HD camera w night IP65 vision weatherproof body PIR sensor cables Anchors Screws Hole drilling template... -
Page 4: Before You Get Started
SENS8 to. Select a 2.4 GHz Wi-Fi network and write down the correct Wi-Fi password. Place SENS8 Light Cam as close as to your router. Place the speaker of your smartphone close to the front side of SENS8 Light Cam. -
Page 5: How To Set Up
How to set up Step 1: Power the Camera Plug the cable into the power port and then plug the power adapter into an indoor power outlet. The indicator light will turn on and turns blinking green when it is ready to set up. - Page 6 Step 2: Connect Download SENS8 App from App Store or Google Play. SENS8 app now supports iOS 9.0 or later version and Android 6.0 or later version. Open SENS8 App and follow the instructions to set up your SENS8 Light Cam in the app.
- Page 7 Keep it in range of your router Make sure that you choose a place within range of your network. Thick or insulated walls can greatly reduce the strength of your Wi-Fi signal, even if your router is close by, so you should try streaming video before you mount your camera.
- Page 8 Plug it into the outlet you want to use and wait for the green light to turn on. SENS8 Light Cam will reconnect to your Wi-Fi network automatically. This may take a minute or two. Keep SENS8 Light Cam plugged in for the rest of the installation.
- Page 9 Before you mount the camera, make sure it can get Wi-Fi in the spot you’ve picked. Hold your SENS8 Light Cam where you’d like to mount it and check to make sure it’s streaming video to the SENS8 app. If you don’t see video, the Wi-Fi may not be strong enough there –...
- Page 10 If you want to route the cable through a wall, use a 1/2" bit to drill a hole for the cable connector. If the wall is made of a material like brick or stone, you may need to use the wall anchors included to hold the screws.
- Page 11 Use the live stream in the SENS8 app to fine-tune your camera’s position. Make the camera slightly downwards, so the motion sensor is optimized to detect human-sized objects at up to 30 feet. Modes Introduction Arm: SENS8 Light Cam monitors your home and sends you a notification with or without sounding the alarm...
- Page 12 Schedule: You can set schedules for Arm and Disarm. Auto-Arm: SENS8 Light Cam automatically arms or disarms itself based on the location services of your smartphone. If SENS8 believes you are away from home, it will arm itself to protect your home.
-
Page 13: Limited Warranty
Product and refund the money actually paid by the original purchaser for the Product. If the Product or a component incorporated within it is no longer available, SENS8 may, at SENS8’s sole discretion, replace the Product with a similar product of similar function. - Page 14 WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. No SENS8 reseller, agent, or employee is authorized to make any modification, extension, or addition to this warranty. ...
-
Page 15: Safety
Keep the camera and all of its components out of the reach of children and pets. If your SENS8 Light Cam is installed more than 2 m above the ground, make sure that you’ve got a cable clip close to... - Page 16 If you’re having issues with your SENS8 and need support, you can always feel free to contact us. Call us: +1 (800) 215 - 8303 (9am-5pm PST） Live chat: mysens8.com Email: support@mysens8.com Facebook: @mysens8 Twitter: @mysens8 Thanks for choosing SENS8!
Need help?
Do you have a question about the Light Cam and is the answer not in the manual?
Questions and answers