Advertisement
2
To Select a WASH
. WATER TEMPERATURE
HOT WATER can be selected
by turn-
ing the Control Knob to 12 or 14 minutes
in the REGULAR HEAVY Cycle.
All rinses use cold water. This saves
energy
and helps prevent
wrinkles
from setting
into fabrics.
3
. To Select a WATER LEVEL
WARM WATER can be selected
by
turning the Control Knob to 8 or 10
minutes in the REGULAR HEAVY Cycle.
l
A warm wash is preset in the SHORT
Cycle. Just turn the Control Knob to
the 4 or 6 minutes setting in that
cycle.
HIGH WATER LEVEL. The washer will
automatically
fill to its highest level,
(about 17.2 galsI65.1
L), when the
Control Knob points to a FILL area.
NOTE: The washer will fill only when
the knob points to a FILL area.
LOWER WATER LEVELS. Setting the
washer to fill with less water also sets
it for a shorter wash time.
1. Push the Control
Knob in and turn it
clockwise
to FIN area in the cycle
you want.
2. Pull the Control Knob out; the washel
will start to fill.
3. When the washer
reaches
the
desired
water level, push in the
Control Knob and slowly turn it past
the FILL area. Pull out the Control
Knob to start the washer.
For all rinses, the washer
fills to its
highest
level with cold water.
5
Advertisement
