OBO Bettermann UDHOME 2 AF Mounting Instructions page 34

Applying the floor covering and adjusting the height
ATTENTION
ATTENTION
34 | EN
Risk of damage through insufficient expansion joint!
An expanding floor covering without a sufficient expansion joint
leads to product damage!
Work the floor covering with no tension up to the floor box compo-
nent (cassettes and floor sockets).
To prevent this, fill a sufficient expansion joint with permanently
elastic joint material.
Abb. 38: Fill the expansion joint
5. Fill the expansion joint around the floor socket with a suitable
flexible, permanently elastic material (e.g. silicone).
Risk of damage from caustic cleaning agents!
Contact with cleaning agents containing acids/chlorides (e.g. ce-
ment residue removers) will cause damage to the product!
Should the basic cleaning of the floor be carried out with these
cleaning agents, we recommend that the cover should be removed
during cleaning. Ensure that no moisture can ingress into the
frame and housing.
Should the cover remain in the frame during cleaning, then all the
components, including the interior, should be protected against the
caustic cleaning agents (e.g. by widespread masking).
Should the components come into contact with caustic cleaning
agents, then they and the seals should be cleaned with clear water.
OBO Bettermann