Advertisement
Quick Links
Children's Chair Assembly Instructions
Please read these instructions carefully upon receiving your chair to ensure that the chair is
assembled correctly and is safe to use.
You will need:
x8
x8
x8
Wooden Dowels
Hollow Nuts
Allen Key
Screws
x2
x4
Rectangular Supports
Chair Side Sections
Back Canvas
Seat Canvas + 2x Sticks
Advertisement
Summary of Contents for Personalise Online Children’s Chair
- Page 1 Children’s Chair Assembly Instructions Please read these instructions carefully upon receiving your chair to ensure that the chair is assembled correctly and is safe to use. You will need: Wooden Dowels Hollow Nuts Allen Key Screws Rectangular Supports Chair Side Sections Back Canvas Seat Canvas + 2x Sticks...
- Page 2 Step 1: Insert the wooden dowels into the exact holes shown. Repeat on both pieces so that each has 4 dowels. Repeat on second piece Step 2: Insert the hollow nuts into the holes on the rectangular supports as shown. Repeat on all 4 supports.
- Page 3 Step 3: Slot the rectangular support onto one of the side sections, with the nuts on the rectangular support facing inwards. Repeat with the all 4 supports. Repeat x4...
- Page 4 Step 5: Firmly slot the second side section on top (as shown), ensuring that all dowels are aligned correctly. Step 6: Using the allen key, screw the 8 screws into the remaining holes on the corners of the chair as shown.
- Page 5 Step 7: Place the chair in its upright position. Take the seat canvas and insert the canvas sticks into either side. Then carefully slot the seat section in place within the seat ridges as shown. Seat Canvas Step 8: Slide the back canvas onto the chair as shown. Your finished chair should look like this!
- Page 6 IMPORTANT INFORMATION This chair is intended for occasional use only. Never allow children to assemble the chairs unless supervised by a responsible adult. This chair has been specially reinforced for the use of children. However, please do not ...