Smart UV The Apollo Instruction Manual page 2

Product Speci cations
Product parameters
Product Name: Home Use UV Germicidal Lamp The Apollo UV-C Disinfection Lamp
Power: 36W / 60W
60 Watts
Input voltage: 110-230VAC 110 Volts
Color: Black / white
Product weight: 1800g
Product size: diameter 180 * 530mm
Scope of application: home use,
office, etc
Control operation mode:
touch the key
Product Details
Product details
1、Operation control panel
Customizable Timers
and Operational Indictor Lights
and indicator light
2、Ultraviolet germicidal lamp
Dual UV-C Emiting Bulbs
3、Lamp body
Protective Outer Casing
4、Human body sensor
5-Meter Motion Sensor
5、Power input socket
110V Wall Socket Plugin
How To Use
Panel control description
After the AC power is connected, press and hold the button
1.Press and hold the power button for 3 seconds to start it up
for 3S to start the machine, and the germicidal lamp will
2. To turn o the Apollo hold the power button for 3 seconds
start to work. In order to avoid skin injury, the system will
3. The default cycle duration is 15 minutes and does not need to be selected after the
delay for 10s to light the lamp. The default is 15min timing,
power-up
and the lamp will go out after the timing. During operation,
4. To Select exposure time greater than 15 minutes (30/45/60 minutes) tap the power key
touch the key once, switch to 30min timing, switch to 45min
once to select a 30-minute cycle, twice for a 45-minute cycle, thrice for 60 minutes, and 4
times to revert to the 15-minute cycle
timing twice, switch to 60min timing three times, and return
5. Once the desire duration is selected leave the room and shut the door. 10 seconds
to 15min timing four times, so as to cycle. Press and hold the
timer will turn the lamp on automatically. The disinfection process will begin allowing
you enough time to leave the room.
key for 3S to shut down.
6. Do not enter the room during the disinfection process.
7. Allow the lamp to cool down for 10 minutes after each disinfection is completed.
WARNING
When turning on the light, please When turning on the light, people
leave the room. You can not be in
and animals must leave the room
the room during operation.
quickly. Otherwise the ultraviolet
UV-C light is dangerous to people,
radiation will cause damage to
pets, and plants. Please use with care.
their bodies.
1
2
Saftey Feature Information
Human induction Description
3
When the sterilizing lamp is in operation, when someone or
The Apollo is equipped with a 5-meter automatic shut o
motion detection sensor. This helps protect unexpected
animals pass by, the sensor will detect it, and then turn off
visitors and pets. If they enter the room when The Apollo
the output, and the lamp will go out to protect the skin from
is running, it will shut o to protect them from the UV-C light.
The Apollo turns back on after the visitor or pet leaves the room,
the damage of ultraviolet rays. After turning off, the system
with a 10-second delay. The Apollo will then operate for the
will automatically turn on and light the lamp after a delay of
remainder of the set sterilization time.
10s, and continue to work.
Best Practices & Saftey Protocols
Matters needing attention
5
1. During use, children shall not touch the lamp body, direct
4
1. Keep out of reach from children. During use, do not touch the lamp
light on eyes and skin, and animals, plants and precious
body or have direct contact with the UV-C light on skin, animals, or plants.
Precious painting materials should not be present.
painting materials shall not be present.
2. Before turning on The Apollo, please close all doors and windows. 2. After opening, please close the doors and windows to
After turning on The apollo please leave the room. Enclosing the room
leave the room. The sterilization effect will be better. After
helps the disinfection process. After sterilization, we recommend
sterilization, please open the doors and windows for
ventilating the room by opening the doors and windows.
ventilation before entering.
3. In case of a malfunction or control failure of The Apollo, or an
3. In case of malfunction or control failure of germicidal lamp,
emergency shut o is needed - cover up with long sleeves and
cover the face and wear UV-C protective eyeglasses. Then enter
it can be warranted within the warranty period without self
the room and unplug The Apollo. In the case of a malfunction
disassembly (except for damage caused by man-made
please reach out to the Smart UV team to go over your warranty.
reasons or improper operation)
4. When The Apollo is not in use, please disconnect the 4. When not in use, please disconnect the power supply and
power supply and place in a dry environment to ensure
place it in a ventilated and dry environment to ensure the
the health of your product.
normal use of the product.
Product parameters