Subscribe to Our Youtube Channel
Summary of Contents for Unique X Rosetta Live
- Page 1 RosettaLive Broadband Event Streaming The following items are included in your RosettaLive start-up package USB - Bluetooth Dongle Remote Control Power Adapter HDMI Cable...
-
Page 2: Table Of Contents
RosettaLive Broadband Event Streaming Index Overview Installing your RosettaLive Device Powering the Device Connecting the Device MovieTransit System is Already Installed MovieTransit System is Not Installed Connecting the Remote Control Connecting to Video/Audio Output Testing your Device’s Connection Technical Support... -
Page 3: Overview
RosettaLive Broadband Event Streaming Overview Your new RosettaLive device has already been pre-configured and registered in our system for a quick and easy installation! Before you begin your installation process, please find a suitable location for your device. Preferably in a room where it is easily connected to the screen projector/video distributor. -
Page 4: Installing Your Rosettalive Device
RosettaLive Broadband Event Streaming Installing your RosettaLive Device Powering the Device Using the powder adapter we have provided, insert the cable into the marked “POWER” port and ensure it is plugged into a suitable power outlet. Note: it is important that the selected outlet is connected to another outlet that is turned off at any time - your RosettaLive device... -
Page 5: Connecting The Device
RosettaLive Broadband Event Streaming Connecting the Device To connect your RosettaLive device to the internet, insert your LAN cable into the “LAN” port and see below for further instructions. Note: LAN cable is not supplied with the RosettaLive start-up package. There are two different configuration scenarios you may encounter: MovieTransit System is Already Installed If you already have a MovieTransit device installed, it is recommended that you... -
Page 6: Movietransit System Is Not Installed
RosettaLive Broadband Event Streaming MovieTransit System is not Installed If your cinema does not already have a MovieTransit system, the RosettaLive device must be connected to your ISP router using a LAN cable. Note: connecting your RosettaLive device to your own internet connection may require network traffic to be reduced to avoid impacting playback. -
Page 7: Connecting The Remote Control
RosettaLive Broadband Event Streaming Connecting the Remote Control To connect the RosettaLive remote control, simply insert the supplied USB dongle into the USB port on the side of the device. As the device is managed remotely during events, use of the remote control is only necessary when testing the performance of the network or manually changing settings. -
Page 8: Connecting To Video/Audio Output
RosettaLive Broadband Event Streaming Connecting to Video/Audio Output The process of connecting your RosettaLive device to your cinema video/audio depends on which system you are using. The device provides image and audio output through HDMI, however SPDIF optical output can be used if an alternative is necessary. -
Page 9: Testing Your Device's Connection
RosettaLive Broadband Event Streaming Testing your Device’s Connection To confirm your device has been installed properly, please turn on the device and take the following steps: Confirm that you have the following image displayed on your connected video output. If not, please double-check your cables to ensure they are connected correctly Use the provided remote control... -
Page 10: Technical Support
RosettaLive Broadband Event Streaming 3. Once the network and power cables are connected, please send an email to rosettalive@uniquehelpdesk.com so we can confirm that the device is properly installed and ready to use. Ensure that your email contains the following information so our team can properly identify your device: Subject: RosettaLive Installation Completed.
Need help?
Do you have a question about the Rosetta Live and is the answer not in the manual?
Questions and answers