Advertisement
Table of Contents
- 1 STEP 1 Remove the 2 Screws Indicated in the Picture below to Remove the Seat Cushion
- 2 STEP 2: Lift Levers and Remove Seat Cushion
- 3 STEP 3: Find Correct Mounting Holes for Suspension
- 4 STEP 4 Attach the Seat Frame to the Top of Your Suspension
- 5 STEP 5: Mount Frame and Slide Seat Cushion Back
- 6 Group Number Side to Side Front to Back
- Download this manual
J800
INSTALLATION GUIDE
FOR EXCAVATORS
WITH SUSPENSION
GROUP NUMBERS:
124-3926
164-0503
164-0478
188-0886
229-9077
240-5063
To ensure correct fit for your machine.
Confirm your CAT Suspension
Group Number and correct
Mounting Centers.
J800 SEAT UPPERS
CAT EXCAVATORS
I N S TA L L AT I O N G U I D E
Phone: 1-800-667-7328
Fax: 1-888-667-7328
www.ultraseat.com
15002205
ON
*Product in photo(s) may be different then purchased product,
For additional photos and information please visit
www.ultraseat.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ultra J800
Summary of Contents for Ultra J800
- Page 1 J800 SEAT UPPERS CAT EXCAVATORS J800 I N S TA L L AT I O N G U I D E INSTALLATION GUIDE FOR EXCAVATORS WITH SUSPENSION GROUP NUMBERS: 124-3926 164-0503 164-0478 Phone: 1-800-667-7328 188-0886 Fax: 1-888-667-7328 229-9077 www.ultraseat.com 240-5063 To ensure correct fit for your machine.
- Page 2 STEP 1 Remove the 2 screws indicated in the picture below to remove the seat cushion. STEP 5 Once the seat frame is mounted to the First Hole slide rails then slide the seat cushion back onto the frame making sure you lift on both seat tilt and height levers.
Need help?
Do you have a question about the J800 and is the answer not in the manual?
Questions and answers