D-Link IP STB DIB-110 Quick Installation Manual page 3

Connect Audio/video Cable To TV
Composite Audio/Video Connection - Plug the supplied yellow video cable into the VIDEO
connector on the back of the DIB-110/DIB-10 and the matching opposite end of the cable to
your television input. Plug the supplied red and white connectors into the AUDIO (color-coded
matching) connectors on the DIB-110/DIB-10. Plug the matching opposite ends of the cable to
your television or audio/video system.
You may skip using the supplied Composite Audio/Video cable, and use one of the other audio and
video connections. These cables are not included with the DIB-110/DIB-10.
TV
_ audio _
R L video
AV-IN
Power On the DIB-110/DIB-120
Connect the DIB-110/DIB-10 to your router with the supplied Ethernet
cable.
Plug the DIB-110/DIB-10 power cord into a power outlet. Position your
DIB-110/DIB-10 so that you can see it from where you view your TV.
Power on the DIB-110/DIB-10 by pressing the Power button on the
DIB-110/DIB-10 remote control.
Note: Make sure your IP STB is not behind the TV so you can use your
DIB-110/DIB-10 remote control.
3