Download Print this page

Firstech, LLC. FTI-FDK1 Quick Start Manual

Vehicle coverage & preparation notes

Advertisement

Quick Links

FTI-FDK1 Type 1B - Vehicle Coverage & Preparation Notes
Make
Model
DL-FM2
Ford
Mustang
Lincoln
MKS
Lincoln
MKZ
Lincoln
MKZ Hybrid
Mercury
Sable
Hey! Read this stuff before you start the installation...
Firmware:
Covered vehicles use BLADE-AL(DL)-FM2, flash module and update the controller firmware before installing.
Door Locks:
With alarm: Door locks require three wire connections (1-unlock, 2-lock) and two (2) diodes isolating the lock wires.
Mustang: Lock/Arm wire color, yellow/gray (pin #9/26 at BCM)
Without alarm: Door locks require two wire connections and no diodes.
Auto-lights: If vehicle is equipped with auto-light feature, refer to the diagram below for required connections.
Auto-light: violet/green (pin #4)
Light-off: white/violet (pin #6)
Okay, now get to work...
Year
Install
2010-14
Type 1
2009-12
Type 1
2010-12
Type 1
2010-12
Type 1
2008-09
Type 1
white/violet
violet/green
87a
+12V
STATUS
Lights
CAN
RAP
Park / Auto
OBD-II
B
OBD-II
B
OBD-II
B
OBD-II
B
OBD-II
B
E
1
4
6
9
10
30
87
SUPPORT - 1(888) 820-3690, EXT. 203
I/O Changes
Trunk
Green White/Blue
CM7000/7200
Cut loop for A/T
CM-900S/900AS
CM900AS/900S Jumper

Advertisement

loading

Summary of Contents for Firstech, LLC. FTI-FDK1

  • Page 1 FTI-FDK1 Type 1B - Vehicle Coverage & Preparation Notes SUPPORT - 1(888) 820-3690, EXT. 203 Lights I/O Changes Make Model Year Install Trunk DL-FM2 Park / Auto Green White/Blue Ford Mustang 2010-14 Type 1 OBD-II Lincoln 2009-12 Type 1 OBD-II...
  • Page 2 FTI-FDK1 Type 1B - Installation Notes & Wiring Diagram DL-FM3 TX loop, not used in this install type, do not cut. Jumper for vehicles that are not equipped with immobilizer, do not connect unless vehicle is confirmed not equipped. If vehicle is not equipped, connect before programming to skip immobilizer learn.