Required To Start; Connect & Activate - Midco HD Digital Adapter Self-Install Manual

Required to Start

• Midco HD digital adapter serial number (from the back of your equipment)
• Your Midco account number
• Your TV remote plus batteries installed in your cable box remote
HD digital adapter serial number (SN): ______________________________________
Midco account number: _____________________________________________________
Connect & Activate
Connect a coax cable from your cable wall outlet to the Cable In (RF
1.
In) connection on your HD digital adapter. Make sure the connection is
finger tight.
2. Connect the HDMI cable from your HDMI connection on your HD digital
adapter TV to the HDMI connection on your HDTV.
If you don't have an HDTV, connect a coax cable from the To TV
•
connection on the back of your adapter with the coax/antenna/cable in
coax on the back of your TV.
3. Plug the power cord into your HD digital adapter and then into an
electrical outlet.
Cable
Coax Cable
Cable Outlet
4. Turn on your TV, and make sure volume is on.
5. Using your TV remote, change the TV input setting to the proper HDMI
input connect the HD digital adapter.
• If you don't have an HDTV and you're connected via coax cable, go
to the back of your cable box. Flip the HD digital adapter switch to
2
HDMI
HDMI Cable
TV Electrical Outlet
Power
Power Cord