Table of Contents
Advertisement
Quick Links
514
March, 2013 - Rev. 1 Firmware
TABLE OF CONTENTS
Section I - INTRODUCTION .............................................1
Section II - INSTALLATION AND CONNECTION .............3
Section III - OPERATING THE 514 DECODER ................6
Section IV - TECHNICAL MATTERS ................................9
Advertisement
Table of Contents
Related Manuals for Inovonics INOmini 514
Summary of Contents for Inovonics INOmini 514
- Page 1 TABLE OF CONTENTS Section I - INTRODUCTION ..........1 Product Description Product Features Product Specifications Section II - INSTALLATION AND CONNECTION .....3 Unpacking and Inspection Warranty Registration Mounting AC Mains Power Battery Operation Radio Frequency Interference (RFI) Headphone Jack Rear Panel Connections Section III - OPERATING THE 514 DECODER ....6 Program Audio De-Emphasis The Front-Panel Meters...
- Page 2 FM carrier wave. Program Audio De-Emphasis: 75µs/50µs, selected with The INOmini 514 is a stereo-baseband decoder for profes- sional applications. It accepts the multiplexed FM baseband push-on jumpers under the top cover.
- Page 3 AC Mains Power All Inovonics INOmini modules are supplied with an out- Section II board switching-type power supply suited to the destination mains voltage. As the actual power consumed by the 514 INSTALLATION AND CONNECTION decoder is 230mA at 12 volts DC, a second DC connector on the rear panel of the 514 allows the user to ‘daisy-chain’...
- Page 4 50µs one. The active-balanced analog line outputs The INOmini 514 accommodates either de-emphasis stand- ANALOG LINE provide a program level of +4dBu for a ard, and is shipped from the factory with the destination- OUTPUTS L/R front-panel meter indication of 0dB.
- Page 5 and monitoring purposes, these meters give an expected mally the green STEREO LED will be lighted. But if pro- visual response only for frequencies below about 400Hz. gramming is actually being broadcast in monaural, or if the transmitter defaults from stereo transmission for some rea- son, or if the input signal is just lost, the yellow MONO LED Setting the Input Level With a Tone will come on instead.
- Page 6 Because it is so small and light, returning the 514 decoder for factory servicing or firmware upgrades is an option that we encourage. Inovonics has never considered factory re- pair charges a significant source of revenue, and we are confident that you will be astonished at how reasonable our rates actually are! —...
- Page 7 (Nothing to read here, either.) (A necessary waste of paper!) — 11 — — 12 —...
- Page 8 RETURN OF GOODS FOR FACTORY REPAIR: A. Equipment will not be accepted for Warranty or other repair without a Return Authorization (RA) number issued by Inovonics prior to its return. An RA number may be obtained by calling the factory. The number should be prominently marked on the outside of the shipping carton.
Need help?
Do you have a question about the INOmini 514 and is the answer not in the manual?
Questions and answers