Advertisement
*Exclusively for
water heaters
Switch power
OFF
before proceeding
1
DANGER !
Electrical shock may result in serious injury or death.
2
Remove top access panel and discard.
The Triton controller will replace this panel.
Remove and keep the insulation blanket.
5
Using the supplied wire connectors, connect
power line (L1 / L2) to the tinned wires on
Triton.
L2
Triton Installation Manual
Installation Manual
3
Remove factory-installed jump wires from
thermostat to power line.
6
Replace insulation removed during installation,
while carefully pulling the probe lead through.
L1
Visit CaSA website at https://casa.energy
WARNING
!
Installation of line-voltage equipment
should be performed by a qualified
Risk of electrical
shock
electrician and be done in compliance
Disconnect power
of local code.
before servicing
Heating elements continuity should
be tested prior to installation
to ensure proper operation.
4
Connect wires with fork terminals to T1 / T2
screw terminals on mechanical thermostat.
T2
7
Secure Triton with the supplied self-drilling
metal screws. Preserve fourth screw for
access panel installation.
T1
Page 1
Advertisement
Table of Contents
Summary of Contents for Casa Triton
- Page 1 Remove top access panel and discard. Remove factory-installed jump wires from Connect wires with fork terminals to T1 / T2 The Triton controller will replace this panel. thermostat to power line. screw terminals on mechanical thermostat. Remove and keep the insulation blanket.
- Page 2 Wait for Wi-Fi icon to turn green (success) or red (fail). This can take up to 10 minutes and reboot is normal. button to launch the configuration process and select TRITON. Follow ALL instructions on screen. Do not use the “Back” button on ADD A DEVICE 2.
Need help?
Do you have a question about the Triton and is the answer not in the manual?
Questions and answers