Fisher-Price Stow ‘n Go Booster Seat Manual

Model Number 79463
Stow 'n Go Booster Seat
Surprise!
A booster seat
that converts to
a backpack
or carry pack.
Booster Seat
Carry Pack
Please keep these instructions for future reference
No assembly is required.
Adjusting the Strap
To prevent falls, always secure
™
booster seat with safety belt. Never
To tighten the strap:
• Feed the attached end of the strap up through the
buckle to form a loop
• Pull the free end of the strap
Backpack
To loosen the strap:
• Feed the free end of the strap up through the
buckle to for a loop
• Enlarge the loop by pulling on the end of the loop
toward the buckle.
• Pull the attached end of the strap to shorten the
free end of the strap
WARNING
leave child unattended.
Free End
B
A
Attached End
A .
B .
Free End
B
A
Attached End
.
A
.
B
Attaching to a Chair
IMPORTANT! Before each use or assembly, inspect this
product for damage. DO NOT use if any parts are missing or
broken. Contact Fisher-Price ® for replacement parts and
instructions if needed. Never substitute parts.
Hook
1
Hook
Fastener
Attachment
Ring
• Turn the booster seat upside down.
• Unfasten the fasteners on the sides of the booster seat
to locate the attachment rings.
• Fasten the strap hooks to the booster seat attachment
rings. Pull up on each hook to be sure it is secure to each
attachment ring.
• Fasten the fasteners on the sides of the booster seat.
• Place the booster
2
Seat
seat upright on
Back
a chair.
• Unfasten the seat
back and lift.
• Wrap the strap
around the bottom of
the chair
• Fasten both straps
Make sure you hear
a "click".
B
• Tighten the strap
A
C
• Pull down on the
strap to be sure it
Strap
is secure around the
chair bottom.
Fastener
Attachment
Ring
Booster
Seat
A
.
B .
C
.