Stirling AP230 Quick Start Manual

This quick start guide contains basic instructions to get you started. For the full picture, please refer to the
supplied manual which has comprehensive usage instructions and important safety advice.
A

Installing the filters

Before using the appliance, you will have to remove all packaging
1
materials from the 3-in-1 filter set, which is fitted inside the
appliance in its original wrapping.
Remove the rear cover of the appliance.
2
Take the packaged filtration system out of the appliance.
3
Remove all packaging materials from the filter components.
4
Reinstall the unpacked filtration system into the appliance.
Reinstall the rear cover.
2
5
Quick Start Guide
Let's get your new air purifier
3

Placement and connection

Place the air purifier on a dry, stable, horizontal and
Do not use the appliance in an environment where oil
is used or smoke is generated, such as in a kitchen!
For a better air purification effect, make sure to maintain
a clearance of at least 30cm from walls or furniture and at
Plug the appliance into a suitable electrical wall outlet
Your air purifier is now all set up and ready for use.
ready to use!
1
4
least 50cm from electrical appliances.
and switch on power to the outlet.
Turn over the page for usage
instructions ...
Model: AP230
B
level surface.
5