Sauder Storage Organizer 422647 Instruction Booklet page 6

Step 2
Fasten nine METAL BRACKETS (3) to the FRONT
å
SKIRT (J) and SHELF MOLDINGS (N). Use nine
BLACK 1/2" PAN HEAD SCREWS (8).
NOTE: The short end of the METAL BRACKET should be
å
fastened to the FRONT SKIRT and SHELF MOLDINGS.
Fasten the CARD HOLDERS (4) to the SHELF MOLDINGS (N)
å
exactly as shown in the enlarged diagram. Use eight BLACK 5/16"
MACHINE SCREWS (9).
The hole is closer
to this edge.
The hole is closer
to this edge.
BLACK 1/2" PAN HEAD SCREW
(9 used for the METAL BRACKETS)
Page 6
N
N
8
www.sauder.com
BLACK 5/16" MACHINE SCREW
(8 used for the CARD HOLDERS)
J
Curved edge
3
(9 used)
Short end
9
Open end
422647