Advertisement
Advertisement
Related Manuals for Nordic Eye Contrast HD
Summary of Contents for Nordic Eye Contrast HD
- Page 1 Nordic eye Contrast HD Nordiceye Contrast V11115‐1 ...
-
Page 2: Table Of Contents
Congratulation to your choice of magnifying aid, we hope this will help you in your everyday life. Contents Introduction ……………………………………….page 2 System information……………………………… page 3 ... -
Page 3: Introduction
Introduction to Contrast. Contrast is a standalone magnifying camera system to be used by people with low vision. The camera system has functions such as Autofocus, many false color options, High contrast mode, can be mixed with PC and also with Distance camera if needed. -
Page 4: System Information
System Information Contrast is a stand-alone camera system that can create an ergonomic environment in school, at home or in a working situation. Assembly. Read more under assembly. Individual assembly. Contrast can easily be assembled to suit different people with different needs or length. -
Page 5: Unpacking And Assembly
Unpacking and assembly Contrast is delivered with the following items. Part Name Part No# 40110010 Camera unit 9540003 Remote control 9540002 Powersupply ... - Page 6 9540001 XY table Included are also a manual, cables and adapters. At arrival, check that the box has no visible damage. If so, report to transport company. Packaging. Packing Materials (EPP) Carton (CORRUGATED PAPER) Wrap around bag ( LDPE4) Contact your community to recycle the packaging material in a proper way.
- Page 7 Installation It is important that you sit properly at the working table. A comfortable chair is to prefer to be able to avoid stress on neck and shoulders and to make it possible to work during a longer time. Notice the points below that can be useful to think about.
- Page 8 Assembly Place the camera unit on proper location. Place the XY table if you prefer to use it at the same location as the camera unit. Connect the monitor cable from the monitor to the camera unit.
-
Page 9: Functions And Setting
Functions and settings Remote control ... - Page 10 Z+ , Zoom in ( increase magnification) Z-, Zoom out (decreas magnification) Increase brightness in colormode or contrast in highcontrastmode. Decrease brightness in colormode or contrast in highcontrastmode. MODE , change between fullcolor mode or high contrastmode // false colors.
- Page 11 Menusystem Keep the MODE button pressed to get in to the menu system. To navigate use Z+,Z-, , To confirm a choice or function press OK. To leave the menu press MODE again. 3 of the menus are important for the daily using. It is RefLine, Split choice settings and False colors.
- Page 12 Settings , split camera / PC When a PC is connected to the camera system there is a choice in the menu to choose what positions that should be visible when pressing the MODE button. Press MODE button for 5 sec, move in the menu by pressing Z+ or Z-.
- Page 13 False colors At delivery the system has full color , white on black and black on white as default mode. Full color is always available. The following color combinations can be stored to the mode button. ...
- Page 14 RefLine (Reference line) Choose the menu Ref line and the following menu will appear. With the OK button you can choose to activate or deactivate the refline. When the ref line is activated it is also possible to change the lines position and ref line color.
- Page 15 Distance camera Brighness If a distance camera is connected to Contrast sometimes adjustments needs to be done. In cases where a blue o red tone is experienced change the settings from indoor to, outdoor or Auto, this is due to the cameras white balance and how the camera behave to surrounding light, sun, windows) ...
- Page 16 Lever to the left, XY table is locked in both X and Y direction. Lever centered XY is locked in X direction. Lever to the right, free movement. ...
- Page 17 Distance camera The 3 following pages will inform regarding when a distance camera is attached to the Contrast. There are 2 different distance cameras, Standard (SD) and High Definition (HD). The functions for the system are the same, difference in format and performance.
- Page 18 Setup Place the distance camera to the table and tighten the table clamp. Connect the cable to the pole of the distance camera and the other end to CAM2 on the Contrast. If a HD distance camera is used, connect the power supply to the pole.
- Page 19 Change speed on the cameras Memory, stores movement positions and magnification. Recall position and magnification Up, Down, Left , Right. Split between reading and distance camera when no computer is connected Also handles the change between the 2 cameras Zoom.
- Page 20 Service Instructions. Maintenance and service. Only perform the servicing and maintenance tasks specified in this manual. All other service, change and service must be performed by qualified personnel. Always contact a qualified service personnel or Nordiceye if you are unsure.
-
Page 21: Safety Information
Safety information • Never connect the product with power if it has been exposed to water, rain or other liquids. Contact your supplier before using the product. • Place the power cord in such a way that no pinching ... - Page 22 Contact us Nordic eye AB Telefon: 0470 72 98 88 Illervägen 15 Fax: 0470 74 95 80 352 45 Växjö...
-
Page 23: Technical Data
Technical data Contrast HD Article number………………………………………. 40110010 Magnification 20” monitor…………………………..1.7-65x Focus………………………………………………...Autofocus Focus area……………………………………………80 mm Free working distance under camera………………280mm Resolution …………..Depends on monitor Max 1920x1200 Frame rate…………………………………….………...60 Hz Output…………………………………………DVI-I Single link Effect……………………………………………………….29 W Effect stand by……………………………………………..4 W Power…………………………………………….100-240 VAC Lightning …………………………..…………………..LED...
Need help?
Do you have a question about the Contrast HD and is the answer not in the manual?
Questions and answers