Advertisement
Safety Recommendations:
Always connect the snow machine to a wall outlet or an earthed mains lead!
Be careful when filling the tank. Unplug the unit from the mains first! Open the tank and fill it by means of a
suitable funnel.
Only use AVE snow fluid. This fluid is environmental friendly, biodegradable and, if properly used, leaves no
residues (please see as stated below).
Do not obstruct the openings on top of the housing in order to ensure a proper cooling. Do not place any
objects on the snow machine.
Installation and use:
1. Unpack the unit. Ensuring all packaging is removed from the machine (do not remove the black sock
in the front of the machine)
2. Fill the fluid tank via a funnel with AVE snow fluid and plug the unit into a mains outlet.
3. Connect the digital remote control to the back of the machine
4. Switch main power swithc to the "on" position.
5. Activate the machine by pressing a button on the keychain remote or by the digital remote (see
remote guide below)
6. After 2-3 seconds the machine should produce a nice flow of artifical snow.
Remote Guide:
MENU
TIMER
MANUAL
LOCK
Please Note:
The Snow1500 will not create a snow effect while 'Wind Class' is set to 0, we recommend a setting or 4 for
moderate snow throw, and 8 for high snow output
After Use:
1. Switch main power to the "off" position
2. Disconnect the machine from mains power, and remove the wireless remote receiver
3. Empty the fluid tank, ensuring no fluid is spilled into the machine
4. Run AVE 'SMM-Snowclean' snow machine cleaning fluid through the machine for 10-15 seconds
(this is best done outdoors)
5. Store the machine is a dry place
Man Vol
Interval Set
Duration Set
Volume Out
DMX
Wind Class
Timer Mode
Manual Mode
Continuous Mode
Snow output (manual mode)
Time inbetween effect (timer mode)
Duration of effect (timer mode)
Snow output (timer mode)
DMX channel
Fan Speed 0-10
Advertisement
