Whirlpool GZ5730 Series Installation Instructions And Use And Care Manual page 8

Cleaning
Aluminum mesh filters:
Clean often using hot water and a
mild detergent. Filters are
dishwasher safe.
Charcoal filters (non-vented
installations):
Clean filter surfaces frequently
with a damp cloth and mild
detergent. DO NOT immerse
filters in water or put in
dishwasher.
Whirlpool Range Hood Warranty
LENGTH OF WARRANTY
ONE-YEAR FULL WARRANTY
From Date of Purchase
WHIRLPOOL WILL NOT PAY FOR
A. Any labor costs incidental to the replacement of defective parts.
B. Consumable parts such as light bulbs and filters.
C. Service calls to:
1. Correct the installation of the range hood.
2. Instruct you how to use the range hood.
3. Replace house fuses or correct house wiring.
D. Repairs when range hood is used in other than normal, single-family household use.
E. Pickup and delivery. This product is designed to be repaired in the home.
F . Damage to range hood caused by accident, misuse, fire, flood, act of God or use of products not approved
by Whirlpool.
WHIRLPOOL AND INGLIS LIMITED DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states or provinces do not allow the exclusion or limitation of incidental or
consequential damages, so this exclusion or limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to
state or province to province.
Outside the United States and Canada, a different warranty may apply. For details, please contact your
authorized Whirlpool dealer.
8
Special blue and yellow strips will
blend to green when it is time to
change the filter. these strips work
best when facing toward the
cooking surface.
30" (76.2 cm) Filter Kit No.
4396291 or 36" (91.4 cm) Filter Kit
No. 4396292 is available from
your dealer.
To clean hood:
turn off power supply. remove
filters. Use a damp cloth and a
mild detergent to wipe all grease-
WHIRLPOOL WILL PAY FOR
Labor and any parts of your range hood (except light bulbs and
filters) which are defective in materials or workmanship.
laden surfaces. Use care when
cleaning fan blade - it must not
become bent or misaligned. DO
NOT ALLOW WATER TO ENTER
MOTOR. Make sure all surfaces
are completely dry before re-
installing filters and turning on
power.
Motor is permanently lubricated.
Do not oil or disassemble motor.