wretro WR-5005-SD Instruction Manual

Wireless smoke sensor

Advertisement

Wireless Smoke Sensor Instruction Manual

Descriptions

Dear users, please read this manual carefully before use.
Descriptions
Wireless smoke sensor adopts the labyrinth photoelectric smoke detection mode. The sensor detects
once every 8 seconds, when the excessive smoke are detected, it will immediately hoot and send alarm
Dear users, sincerely thank you for choosing our products. For your convenience of installing and using
signal to Smart Gateway. The battery life can be more than 10 years owing to its ultralow power
this product, please read this manual carefully before use.
consumption technology and two-way wireless communication technology.
Gingerway wireless smoke sensor adopts the labyrinth photoelectric smoke detection mode. The sensor
detects once every 8 seconds, when the excessive smoke are detected, it will immediately hoot and send
alarm signal to SmartC gateway. The battery life can be more than 10 years owes to its ultralow power

Main Features

consumption technology and two-way wireless communication technology.
► Fully digital, highly reliable, large coverage, low power consumption internet of things, two-way
This product can be used independently; For network alarm, it must be used with Gingerway SmartC
wireless network
series of gateways.
► Labyrinth photoelectric smoke sensor, with high stability and reliability
► Manual testing function
Main Features
► Ultralow power consumption, battery life exceed 10 years
√ Z-Ginger® full-digital, highly reliable, large coverage, low power consumption internet of things two-
way wireless network
► Low battery notification
√ Labyrinth photoelectric smoke sensor, with high stability and reliability
► Two-way wireless network
√ Manual testing function
√ Ultralow power consumption, battery life exceed 10 years

Product Structure Diagram

√ Low battery notification
Product Structure Diagram

Installation

1. Mount the sensor base on the ceiling of detection area with screws;
2. Aim the sensor bottom at the positioning groove of sensor base, rotate the sensor clockwise to fasten it.
Installation
Wireless Smoke Sensor Instruction Manual
RFzone Automations Pvt. Ltd.
Gingerway Technologies Co.,Ltd
Living Simplified
GW-4324
WR-5005-SD
Enjoy the life
1. Indicator
2. Test/Bind Button
3. Siren
1. Indicator
4. Cell Cover
2. Test/Bind Button
3. Siren
4. Cell Cover
201709 V1.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WR-5005-SD and is the answer not in the manual?

Questions and answers

Summary of Contents for wretro WR-5005-SD

  • Page 1 Wireless Smoke Sensor Instruction Manual GW-4324 Wireless Smoke Sensor Instruction Manual WR-5005-SD Enjoy the life RFzone Automations Pvt. Ltd. Gingerway Technologies Co.,Ltd Living Simplified Descriptions 201709 V1.1 Dear users, please read this manual carefully before use. Descriptions Wireless smoke sensor adopts the labyrinth photoelectric smoke detection mode. The sensor detects once every 8 seconds, when the excessive smoke are detected, it will immediately hoot and send alarm Dear users, sincerely thank you for choosing our products.
  • Page 2 Short press the test button can send out a testing alarm to SmartC gateway. Usage Bind the smoke sensor with Wretro’s Smart gateway before use : Long press the bind button for 5 seconds, the indicator will continuously flicker and send out binding request. Add a new smart device Technical Parameters binding on the Wretro App.

Table of Contents