Panasonic CF-VFD Series Operating Instructions Manual page 3

<Installing the FDD driver>
When the FDD driver has not been installed, install the FDD driver with the following
procedure. (As the FDD driver is automatically installed on Windows 2000, the following
procedures are not needed. )
1 Connect the FDD to your computer.
2 At the [Add New Hardware Wizard], select [Next].
3 Select [Search for best driver for your device (Recommended)], select [Next].
4 Add the check mark for [Specify a location], input [c:\util\drivers\usbfdd], then select
[Next].
5 Confirm that [PnP TEAC USB FDD] is displayed as the device, then select [Next].
6 Select [Finish].
3